|
|
|
|
#1
|
||||
|
||||
That's an impressive task your undertaking and a great way to keep the brain and hands active too.
Seen as your THE duramax guy I have a duramax/Allison question. My gmc is giving me a slight problem witch I think I got narrowed down to a broken wire or bad connection. Once in a while my tranny will go into limp mode throwing a p0700 code and p0659. I've taken it into the local dealership all they have done for me is change the TCM and check the fluids clear the codes and charge me a **** load with the reoccurring issue. I need to get ahold of the wiring diagram and pin location that connects the TCM to the transmission. I'm looking for wire #11 on the TCM to pin 14 on the Ali connector it should be running 12volts. I've looked the internet over without success.
__________________
93 V-21 200/9.9 Yamaha 
|
|
#2
02-29-2016, 12:39 AM
|
||||
|
||||
|
Quote:
__________________
2011 SUNDANCE B20CCR SKIFF, 2011 YAMAHA 90HP 4 STROKE, 2011 KARAVAN SINGLE AXLE ALUMINUM TRAILER, LOWRANCE ELITE-7 HDI, MINN KOTA RIPTIDE TROLLING MOTOR 2000CC HYDRA-SPORT 225+HP EVINRUDE SOLD  AND THE PINK JEEP!!!! R.I.P. http://www.wellcraftv20.com/communit...ad.php?t=11664 
|
|
#3
02-29-2016, 01:43 AM
|
||||
|
||||
I know that for the longest time Ritchie Compasses were filled with Mineral Spirits. They switched over to their own blend of something a few years back. And my A/C gauge sets all have the gauges filled with a heavy oil to prevent compressor bounce. Not sure what it is but it's probably silicone.
__________________
1987 V20 w/1987 150HP Yamaha on a Shoreland'r Trailer 1978 16.5 Airslot w/1996 120HP Force on a Four Winns trailer 1996 V21 w/1993 200HP Mercury on a Shoreline Trailer All towed by a 5.7L Hemi Durango. If God didn't have a purpose for us we wouldn't be here, so Live simply, Love generously, Care deeply, Speak kindly. (Leave the rest to God)  Silence, in the face of evil, is itself evil. Not to speak is to speak, not to act is to act. God will not hold us guiltless.
|
|
#4
02-29-2016, 12:46 PM
|
||||
|
||||
|
From the factory I believe they used a 10,000 weight silicone oil. For fuel gauges they have found that 30K weight seems to help provide more dampening. I put 30K in a fuel gauge, and 10K in the oil and temp gauges. Still waiting on one more tool so I can calibrate the gauges, then try it out.
__________________
2011 SUNDANCE B20CCR SKIFF, 2011 YAMAHA 90HP 4 STROKE, 2011 KARAVAN SINGLE AXLE ALUMINUM TRAILER, LOWRANCE ELITE-7 HDI, MINN KOTA RIPTIDE TROLLING MOTOR 2000CC HYDRA-SPORT 225+HP EVINRUDE SOLD AND THE PINK JEEP!!!! R.I.P. http://www.wellcraftv20.com/communit...ad.php?t=11664
|
 |
| Thread Tools | |
| Display Modes | |
|
|
Hybrid Mode
