|
|
|
|
#1
|
||||
|
||||
The welch plug numbers became useless starting in the late 80's to early 90's depending on the model. Or if it was a factory replacement powerhead it came with it's own serial number on the welch plug. A dealer MIGHT be able to help you with the welch plug number, but I wish you luck. The good part is there are not that many different parts for the different years for the 1.6L cross-flow engine from about 88 on. There were some basic carb differences in the jetting, and some ignition changes, other than that the basic engine was the same since the 70's.
__________________
2011 SUNDANCE B20CCR SKIFF, 2011 YAMAHA 90HP 4 STROKE, 2011 KARAVAN SINGLE AXLE ALUMINUM TRAILER, LOWRANCE ELITE-7 HDI, MINN KOTA RIPTIDE TROLLING MOTOR 2000CC HYDRA-SPORT 225+HP EVINRUDE SOLD  AND THE PINK JEEP!!!! R.I.P. http://www.wellcraftv20.com/communit...ad.php?t=11664 
|
|
#2
08-18-2015, 01:45 AM
|
||||
|
||||
|
I appreciate it y'all. The serial number tag of course is unreadable and covered in grease from the steering cable.
__________________
1985 Wellcraft V-20, Evinrude ETEC 150: SOLD 1979 Marine Trader 44, twin Ford Lehman 120s 2006 Panga 14, Tohatsu 20
|
 |
| Thread Tools | |
| Display Modes | |
|
|
Hybrid Mode
