Wellcraft V20 Community

Go Back   Wellcraft V20 Community > Wellcraft V-20 Forums > Repairs

Reply
 
Thread Tools Display Modes
  #1  
Unread 07-18-2015, 01:01 PM
surchin surchin is offline
Member
 
Join Date: Feb 2011
Posts: 44
Default

yep, the ocean out here does not allow me to go full throttle however i do a lot of diving and with a couple guys there is a lot of weight, but I'm still 3/4 throttle ish.
and yes I'm looking at a realistic 8-10,000 for this i bet. 5200 for motor was just a quick look up at the boat shop to get an idea.

MY hull is probably not as strong as I think it is, there are no obvious soft spots and the environment here is not moist to creep into wood, and some serious checking is def a first, drilling holes sounds painful but its probably the best way to look at a core.

Thanks boys, I'm open to any more links on all the motor options here, i will check them out. I still may get lucky and it is a bad drive in which case a new SEI drive is my plan. although a new motor and drive is in my dreams.

Reply With Quote
  #2  
Unread 07-18-2015, 01:10 PM
surchin surchin is offline
Member
 
Join Date: Feb 2011
Posts: 44
Default

what is advantage of a "bobtail" verses a complete motor? 4700 on sale complete is good. would i need to replace mount locations though? i have rebuilt the engine mount stringers a few years ago.

I do not think a new long block that is bare is a good option, all the working parts that attach from my old motor are pretty much 1978 orig or ebayed and the labor costs to remove and rebuild it would be more than a new motor. I do not have knowledge time or space to do it so I'm paying a shop the labor $100 hr. i can't see putting a 30 year old parts, starter, on a new motor as a good option.

Last edited by surchin; 07-18-2015 at 01:17 PM.
Reply With Quote
  #3  
Unread 07-18-2015, 01:35 PM
smokeonthewater's Avatar
smokeonthewater smokeonthewater is offline
God
 
Join Date: Oct 2011
Location: Indiana near louisville Ky
Posts: 1,814
Default

RED FLAG!!!!
"Rebuilt engine mount stringers"
To do that is a full on tear down
Remove the cap, replace stringers (full length of boat) replace floor....
If you had stringer problems and did any less than that you can forget the motor and start boat shopping.
Reply With Quote
  #4  
Unread 07-18-2015, 02:16 PM
surchin surchin is offline
Member
 
Join Date: Feb 2011
Posts: 44
Default

alright smoke yes def some orange flags flying out here, i just know what i have had to do to this old motor when i got this boat on the cheap and i would like to avoid going through that again trying to buy another old boat cheap.

where so you find an old boat in good condition anyway.

i don't know, i guess i will just use my kayak more.
Reply With Quote
  #5  
Unread 07-18-2015, 02:48 PM
smokeonthewater's Avatar
smokeonthewater smokeonthewater is offline
God
 
Join Date: Oct 2011
Location: Indiana near louisville Ky
Posts: 1,814
Default

Ur talkin about spending 10k.... That's not cheap...
10k plus whatever you can get out of your current boat should net you a decent water ready boat.
Reply With Quote
  #6  
Unread 07-18-2015, 03:13 PM
twhrider2 twhrider2 is offline
Senior Member
 
Join Date: Jul 2011
Location: Asheboro N.C.
Posts: 145
Default

Surchin ...I also run a 78 470 that fortunately runs great. Recently picked up a 3.7LX 190hp fresh water low time engine for spare for 300 bucks...just sayin. If your are not in a hurry they are out there.
Reply With Quote
  #7  
Unread 07-18-2015, 05:10 PM
surchin surchin is offline
Member
 
Join Date: Feb 2011
Posts: 44
Default

tw ya i guess thats another way to go - just keep shopping for one but man id hate to go through all that and buy a dog. There is nothing in my area and the pics i have seen of these do not seem worth the effort to purchase and ship one but i am open to any leads if you have any from your effort to get one.

Has anyone actually run a 3.0 and is it actually too little HP to push the boat?
Reply With Quote
Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -5. The time now is 12:08 PM.


Powered by vBulletin® Version 3.8.2
Copyright ©2000 - 2026, Jelsoft Enterprises Ltd.