|
|
|
|
#1
|
||||
|
||||
I have successfully used 2 part epoxy paint (Con-Lux) that was over 10 years old on a trailer. Worked perfectly. Mix up a test batch at normal ratios to confirm it's usability. But I'm guessing it will be fine.
__________________
1987 V20 w/1987 150HP Yamaha on a Shoreland'r Trailer 1978 16.5 Airslot w/1996 120HP Force on a Four Winns trailer 1996 V21 w/1993 200HP Mercury on a Shoreline Trailer All towed by a 5.7L Hemi Durango. If God didn't have a purpose for us we wouldn't be here, so Live simply, Love generously, Care deeply, Speak kindly. (Leave the rest to God)  Silence, in the face of evil, is itself evil. Not to speak is to speak, not to act is to act. God will not hold us guiltless. 
|
|
#2
03-13-2015, 06:47 PM
|
||||
|
||||
|
I've used pressure treated plywood successfully but only after drying it out completely by sitting the plywood behind our woodstove. I then treated the plywood with a slow cure penetrating epoxy to eliminate rotting issues.
However marine grade plywood is certainly a better but at a much greater cost. Even better then marine grade plywood would be coosa board.
__________________
Regards Barry 1987 V20 (sold) :( 1996 23' Wellcraft 1991 V20 ;)
|
|
#3
03-15-2015, 12:39 PM
|
|||
|
|||
|
Thanks guys. I was really hoping not to have to take it out but guess I gotta bite the bullet.
|
 |
| Thread Tools | |
| Display Modes | |
|
|
Hybrid Mode
