![]() |
|
|
|
#1
|
|||
|
|||
|
Yep I was inferring to mini wax I wasn't sure but I will use teak oil on my cabin door, but you said you heard of people using trans fluid, did you ever here how it comes out or looks, that's interesting, if I use that I would save a lot of money cause I have a lot of trans fluid here.
__________________
love to fish |
|
#2
|
||||
|
||||
|
I'm thinking the teak oil smells better.
__________________
1985 Wellcraft V-20, Evinrude ETEC 150: SOLD 1979 Marine Trader 44, twin Ford Lehman 120s 2006 Panga 14, Tohatsu 20 |
|
#3
|
||||
|
||||
|
i tried tranny oil, bradford's right, it smells bad and gives the teak a dark red "cherry cola" kinda tint. i would not advise it. i have also heard of using tung oil. never have tried it. the thing about just using oil is it will lubricate the wood, but is constantly drying out unless you seal it. if you just apply oil, it will need retouching pretty quick. like inaforty said, for teak that is constantly getting wet (swim platform) oil is the ticket, but for trim & doors oil and sealant will hold up. i have just found the cetol easier to apply and last longer than others.
|
|
#4
|
|||
|
|||
|
Cetol? It's for the cabin door, it's not big. I will try that oil. Do you get it at a marine store or Home Depot has it.
__________________
love to fish |
|
#5
|
||||
|
||||
|
http://www.westmarine.com/buy/sikken...04_128_002_501
this is a link to it, probably find it cheaper somewhere else. you need to get a qt of the finish you want and a qt of the overcoat. i use the gloss. it seems "harder" and holds up better. usually sometime in the spring WM will run a sale with it half price. not trying to talk you out of varnish, might want to get up with inaforty and see what is involved. the one time i used it, it needed to be redone in a year. |
|
#6
|
||||
|
||||
|
The teak on my Grady was pretty far gone. I tried oiling it but it didn't help. I wound up sanding it down and using oil from Home Depot, I got about a drain out of it. The next year I oiled it and put 3 coats of helmsman on it.
__________________
1999 Wellcraft 22WA-200 Ocean Runner 1982 Grady White Tarpon 190-110 Evinrude-Sold 1996 Striper 2100WA-RIP Sandy 1989 Wellcraft 18-Sport-125 Force-sold |
|
#7
|
||||
|
||||
|
Teak oil will actually dry to an extent. Other petroleum based oil such as tranns and things like would get tacky i would think and attract dirt and crap? We pressure wash our teak just enough tip pressure to not "Fur" the wood then let dry then apply oil. We will apply oil 4 or 5 times a year and the teak stays beautiful.
|
![]() |
| Thread Tools | |
| Display Modes | |
|
|