1985 V20 Half Tower/Hardtop

[jhamz71]

Yeah, I am actually friends with Marc over at Carolina Custom Rigging. Im going to talk to him about this sometime in the future. Just wanted to see some pictures first.

Thats what it runs skunk. 5000 rpm and 43

[000's]

here's a pic of my wife's boat

Attachment 5834Attachment 5834

[jhamz71]

do you have any other pictures?

[SkunkBoat]

Originally Posted by jhamz71

Thats what it runs skunk. 5000 rpm and 43

I'm no motorhead but seems like low rpm & speed for a 175 2 stroke on a V20

and 000s, that's some serious rodholders!

[SkunkBoat]

jhamz,


speaking of rodholders, if you have a top made, get all the rodholders welded the way you want them right then. Adding later on is not so easy once you run wires thru the tubing.


When I had the cracks fixed I also had 2 outward facing rodholders added.


The guy warned me to pull all my wires out. (They were a bear to get in because of the multiple 90deg bends) So I connected a piece of 14gauge house wire as a means to pull them back. Sure enough, it got welded to the inside of the tube. Luckily some yanking got it loose without breaking it off.

[000's]

thanks skunk need a few more but ran out of room!!!!