|
|
|
|
#1
|
||||
|
||||
I smoke all the time on my WSM 22.5 Ferm and all I can say is Git her Done.
Looking forward to it
__________________
Willy 1986 V20 Old School 1992 V20 1992 150 Yamaha 1997 HydraSport 2250 Vector 2009 17' G3 Outfitter "G Spot" http://www.youtube.com/watch?v=TDebw...eature=related "I won't be wronged, I won't be insulted and I won't be laid on a hand on. I don't do these things to others and I require the same from them" JW 
|
|
#2
11-24-2014, 12:21 AM
|
||||
|
||||
|
Got a bit furthur along today, I sure hope I can get it done by Tuesday so I can burn it in and season it for Thursday. Got the firebox all welded on, sealed up, and the door on it(still have to build a latch for it). Got it upright, so it is looking like a smoker now.
Heres the smoke chamber before I closed it up.  And here it is all closed up.  The legs are all welded on, and supports welded in.  Got it upright, firebox door on, and the wooden skids for it to sit on bolted on.  Firebox door open, still have to decide how to build a latch for it and straighten the door out some as it pulled during welding. 
__________________
2011 SUNDANCE B20CCR SKIFF, 2011 YAMAHA 90HP 4 STROKE, 2011 KARAVAN SINGLE AXLE ALUMINUM TRAILER, LOWRANCE ELITE-7 HDI, MINN KOTA RIPTIDE TROLLING MOTOR 2000CC HYDRA-SPORT 225+HP EVINRUDE SOLD  AND THE PINK JEEP!!!! R.I.P. http://www.wellcraftv20.com/communit...ad.php?t=11664 
Last edited by THEFERMANATOR; 11-24-2014 at 01:39 AM.
|
|
#3
11-24-2014, 12:33 AM
|
||||
|
||||
|
Lookin awesome!
I think it would be hella cool to make the latch like an old wood stove latch with the spring coils on the end Last edited by smokeonthewater; 11-24-2014 at 01:51 AM.
|
|
#4
11-24-2014, 12:38 AM
|
||||
|
||||
  
|
|
#5
11-24-2014, 01:42 AM
|
||||
|
||||
|
Fixed the pic. As for the handle, I don't really have time to order one right now, so I'm going to have to build something. That, and I'm trying to use as much scrap material as I can.
__________________
2011 SUNDANCE B20CCR SKIFF, 2011 YAMAHA 90HP 4 STROKE, 2011 KARAVAN SINGLE AXLE ALUMINUM TRAILER, LOWRANCE ELITE-7 HDI, MINN KOTA RIPTIDE TROLLING MOTOR 2000CC HYDRA-SPORT 225+HP EVINRUDE SOLD AND THE PINK JEEP!!!! R.I.P. http://www.wellcraftv20.com/communit...ad.php?t=11664
|
|
#6
11-24-2014, 01:50 AM
|
||||
|
||||
|
sure... I would have been quite disappointment if you ordered it!
just figured some pics might help inspire Have you thought about a gasket around the door or just gonna let it draft? an oven door gasket would work
|
|
#7
11-24-2014, 02:01 AM
|
||||
|
||||
|
going to try it as is for now, but i can buy a thin 1/8" gasket later on if needs be. need to get a close up of my firebox hinges. made them out of 5/8" round bar and 1/2" black iron pipe. tsc wante $13 a piece for decent hinges, thats about what i will have in all of them, and they are much heavier.
__________________
2011 SUNDANCE B20CCR SKIFF, 2011 YAMAHA 90HP 4 STROKE, 2011 KARAVAN SINGLE AXLE ALUMINUM TRAILER, LOWRANCE ELITE-7 HDI, MINN KOTA RIPTIDE TROLLING MOTOR 2000CC HYDRA-SPORT 225+HP EVINRUDE SOLD AND THE PINK JEEP!!!! R.I.P. http://www.wellcraftv20.com/communit...ad.php?t=11664
|
 |
| Thread Tools | |
| Display Modes | |
|
|
Hybrid Mode
