Smoker build

[THEFERMANATOR]

I've read about the galvanized and cooking before, but in all honesty I grew up eating whole hogs and such out of a nearly identical smoker with no problems. Some say that it takes 750 degrees for the zinc coating to gas, and others say it can gas at 500, but in reality I will most likely never get it that hot. The hot portion will be the firebox, and it will be all steel. I'm going to take a grinder to the inside of it and get most all of the scale and such off before I close it up, but after years of being used as a water tank there wasn't much coating left inside of it. It didn't have hardly any of the gassing or the white flaking off when I welded the inside of it, just alot of spatter from the surface rust. The outside of it on the other hand has the white flake off and the funny colored gassing when I weld to it. I know my uncle used to build smokers on the side for people, and he used nothing but old galvanized water tanks for his builds when he did them.