Brand new mid hp motor?

[RidgeRunner]

UPDATE:

The one holding the purse strings is the only one seemingly interested in getting this project done. Today is the fire up the peons day. Time to get something done once and for all. Waiting on a dealer to order a couple of critical items. Like a junction box for the Smartcraft Gauges and a couple of control cables. Then I am still having shipping issues on another item or two. Either the dealer will get the stuff I need today or I will just order it online and have it tomorrow or the next day from boats.net or iboats.com.

This project began three weeks before Labor Day. This waiting around is making me stir crazy.

[THEFERMANATOR]

On a plus side, you didn't miss much for scallop season. Went out SUnday to the same area we went to last year, and between 2 of us in 3 hours only magaed about a gallon in the shell. We searched and searched, went out deep past the other boats, in shallow, on top of the other boats, but still ended up with next to nothing. Of course fishing is Chass wasn't much better. Saw LOTS of BIG fish, but none would take a lure. Only ended up with one 16 inch trout. We hooked into some ladyfish, but lost them all to some big trout. That was the worst was sight casting to some MONSTER trout, seeing come up and stare at whatever we through at them, but they wouldn't take a lure. Hook a ladyfish though, and lose it instantly to a trout. Saw one that had to have been 28 inches if he was an inch. Looked like a friggen snook with spots it was so thick. Or the big school of bull reds we drifted over that just stared at us.

[RidgeRunner]

Well, that is not at all what I wanted to hear but I might feel a little better about not going. Crazy about the gator trout not hitting. They are fairly aggressive this time of year. Redfish doesn't surprise me much. That is why I need to go. I want to have trout defy my lures right to my face. Redfish too. LOL!

Well there is some progress with the parts and pieces. Switch panel shall arrive in the a.m. and the dealer might get a reprive until tomorrow morning..those parts are on the UPS truck today too.. Happy Happy

Pictures soon I promise.

[RidgeRunner]

Found my pin pushing tool (Radio Shack) to change around a couple of Molex connectors. Mercury sent the controls for an I/O instead of an outboard the main difference is that the trim switch has four wires? Harness only has three and the plugs are very different. I can surmise the extra wire is for some version of trim limit/trailer tilt ? Who knows but the plastic molex 4-wire connectors from Radio Shack did the trick. Used the same setup for the jack-plate control wires. Ran new 1 Ga primary wire from the battery under the console to the transom and yanked the 18 year old jumper cable wires and extention chord (Orange) that the builder used to wire the old girl originally. I have literally changed every wire.
A few connections to solder up and we will be running in no time.

[RidgeRunner]

J-box -- check
Control Cables -- check
Switch Panel -- check

[RidgeRunner]

Progress... Finally...

Switch panel in all rigging done ready for a motor
NV Repower 027.jpg

NV Repower 028.jpg

NV Repower 029.jpg

[RidgeRunner]

That first picture reveals a speedo that goes to 80.. Pfffft!