my 7 yrs warranty

[the daydreamer]

the problem with buying a used ecu from e-bay or anywere else is alot of times they cant be reprogramed to match the motor. we ran into that alot when i worked for BMW & MERCEDES. once the ecu was programed for a pacific vin# you could not take it out and put into another car and reprogram it to that vin# hence forceing the customer to go to the dealer. they are high for what they are. i would call customer service and ask for some GOODWILL ASSISTANCE!! was it dealer installed? if so they should be able to contact the service rep and get you some kind of help!!!

[lumberslinger178]

Yes it was dealer installed an hes looking into it for me which is great but I'm prepared to bite the bullet if I have too..

[the daydreamer]

trust me be firm out of pure customer satisfaction I think they will do something for you!!!!! it my be they pay for the part and you pay labor or it could be a 50/50 split. anything they do for you you will be better off than having to take the full brunt of the cost!!!! let me know what happens!! good luck!!!!!!!!!

[phatdaddy]

boating & fishing prices have no reason. considering what all the ecu does & what it took to engineer it & make it, that price seems more reasonable than guys spending $750 for a cooler. 300 hours does seem a little premature. i hope that is the problem, not the symptom of another issue. my merc went through 3 or 4 switchboxes before we figured it was a ground upstream causing the problem.

you could get the dealer to write it up as a Dewalt part and write it off

[lumberslinger178]

I like that idea of the dewalt write off phat .... the cooler was an impulse buy i guess ..... but it did have great reviews.

[phatdaddy]

lumber, i didn't know you got a cooler. was not trying to be smart a**, sorry

[Destroyer]

Originally Posted by the daydreamer

the problem with buying a used ecu from e-bay or anywhere else is a lot of times they cant be reprogrammed to match the motor. we ran into that a lot when i worked for BMW & MERCEDES. once the ecu was programmed for a pacific vin# you could not take it out and put into another car and reprogram it to that vin# hence forcing the customer to go to the dealer. they are high for what they are. i would call customer service and ask for some GOODWILL ASSISTANCE!! was it dealer installed? if so they should be able to contact the service rep and get you some kind of help!!!

Yep, was not ranting about things like that. A used ECU off of eBay is rarely a good investment, simply for the reason you pointed out. But the price I quoted was valid. My point was the outrageous prices charged for marine equipment in general. They (the makers of such) would have us believe that they have to charge more because of extra steps necessary for marine use, and, to a point, they are correct. But if a part costs $100 to make normally, and $150 to make for marine use, it should NOT give them the right or the ability to charge $2000 for it! But since they know that without that part your $15,000 engine will not run they feel free to do such things, and from where I sit, it's just plain wrong.

(And as far as EEPROM's go, anyone with the right equipment and knowledge should be able to reprogram one. But dealer only software is closely guarded, just so that they can charge whatever they want).