Water coming out of carb

[Destroyer]

WOW... Someone older than me.!!! I'm 70 Larry, and I thought that I had the title as the oldest here. Guess I'm in second place now.

And for the record, some of my qualifications are that I also have a South Bend Lathe, and a J head Bridgeport miller, a welder and more tools that I'll ever really need. Oh, and I'm a 1st class machinist, a licensed HVAC mechanic, and a mechanical engineer. I retired from the electric company that brought you 3 mile Island (Although that was not one of my responsibilities [thank God]). My point is I too have been a wrench turner since I was a child. I pulled my first tranny (out of a 53 Chevy) when I was 13, and I haven't looked back since. But when Ferm told me to clean the carbs on my 91 Johnson looper, and Spare told me to change the reeds on it, I did both.. and in the process found that the carbs were melted from a fire and leaking raw gas. Took me almost 3 weeks to get the parts and do the work myself, but that engine is still purring today. Yes, I lost 3 weeks, but possibly saved my life by not having a fire while I was out on the ocean.
So you see, you're not unique, and point of fact, most of these problems pop up around this time of year... because that's when we use our boats. Really, we're just trying to save you time and money... and yes, possibly your life. Red sky's at night.....I'm done.

PS. Oh, and I'm fairly certain that both Spare and Ferm ARE certified also.

[Larryrsf]

Originally Posted by Destroyer

WOW... Someone older than me.!!! I'm 70 Larry, and I thought that I had the title as the oldest here. Guess I'm in second place now.

And for the record, some of my qualifications are that I also have a South Bend Lathe, and a J head Bridgeport miller, a welder and more tools that I'll ever really need. Oh, and I'm a 1st class machinist, a licensed HVAC mechanic, and a mechanical engineer. I retired from the electric company that brought you 3 mile Island (Although that was not one of my responsibilities [thank God]). My point is I too have been a wrench turner since I was a child. I pulled my first tranny (out of a 53 Chevy) when I was 13, and I haven't looked back since. But when Ferm told me to clean the carbs on my 91 Johnson looper, and Spare told me to change the reeds on it, I did both.. and in the process found that the carbs were melted from a fire and leaking raw gas. Took me almost 3 weeks to get the parts and do the work myself, but that engine is still purring today. Yes, I lost 3 weeks, but possibly saved my life by not having a fire while I was out on the ocean.
So you see, you're not unique, and point of fact, most of these problems pop up around this time of year... because that's when we use our boats. Really, we're just trying to save you time and money... and yes, possibly your life. Red sky's at night.....I'm done.

PS. Oh, and I'm fairly certain that both Spare and Ferm ARE certified also.

Thanks. Of course my argument isn't that your and other advise was not correct and useful, but that what some suggested didn't factor in the reality of my boat and this time of year in San Diego. Fact, If I didn't get my boat off that trailer, I would not have been able to rebuild that trailer this Summer. Fact, with no trailer, I remained unable to move the boat out of the water. Fact, If I didn't get my boat in the water and into a slip, most likely I would not have been able to use it this Summer. So I had to risk that the engine was ready to run several dozen hours this Summer. If it blew up, it blew up. I had $100 in boat, engine, and trailer and I have both a fire extinguisher and towing insurance. I have the boat insured for $12k. Is it worth that?

Hence during these early discussions I was obliged to ignore what was undoubtedly prudent advise under ideal circumstances. I was working under far from ideal circumstances. Sorry to hurt anyone's feelings.

BTW, I was an NRC Inspector. Back in 1982, I was sent to 3-Mile Island after the incident. I was one of inspectors who interviewed those operators to learn what actually happened. Then I factored that into my operator examinations at other nuclear power plants over the next 2 years I was in the NRC. We learned how to ensure that didn't happen again!

Larry

[Larryrsf]

Now I am debating whether to take the boat out of the water and try to clean the bottom. Really, what additional damage will be done by more weeks of marine growth on that fiberglass? I keep the engine tilted up and I intend to try to flush it with fresh water after each outing. And certainly the boat will be slower on the water as it drags all that stuff, but so what? The water in the Harbor here is nearly always too choppy to allow comfortable planing by small boats, much less higher speeds. The smartest speed seems to be about 15MPH and 2000 RPM. Even BIG wakes don't pound and scare me or my passengers.

And there are many places I haven't explored yet.

Does anyone really think there is a difference in marine growth damage to fiberglass between one and 4 months?

Larry

[spareparts]

don't know how the growth is where you are at, but down here, this time of year, you have to clean the bottom at least every two weeks or it won't even plane out, worse than that, running the boat with a dirty bottom can overload the engine, I've seen more than one engine failure from a dirty bottom. If you don't have bottom paint or at least a barrier coat, you're looking at blisters by now