![]() |
|
|
|
#1
|
|||
|
|||
|
Almost have the cap & old floor out. . It's coming along but have new questions about the inner/outer skins. Are they laminated together? What should the inside off the outter skin look like? Looks rough ... guess I need to figure out these pics. . Should this go in the repair forum?
|
|
#2
|
||||
|
||||
|
Sounds like you're in deep now Brywheat! Keep going, people here can talk you through it.
__________________
1985 Wellcraft V-20, Evinrude ETEC 150: SOLD 1979 Marine Trader 44, twin Ford Lehman 120s 2006 Panga 14, Tohatsu 20 |
|
#3
|
||||
|
||||
|
Yes, but we're not real sticklers here. General is fine also. It's more important for us to see/help than to worry about what section the post is made in.
__________________
1987 V20 w/1987 150HP Yamaha on a Shoreland'r Trailer 1978 16.5 Airslot w/1996 120HP Force on a Four Winns trailer 1996 V21 w/1993 200HP Mercury on a Shoreline Trailer All towed by a 5.7L Hemi Durango. If God didn't have a purpose for us we wouldn't be here, so Live simply, Love generously, Care deeply, Speak kindly. (Leave the rest to God) ![]() Silence, in the face of evil, is itself evil. Not to speak is to speak, not to act is to act. God will not hold us guiltless. |
|
#4
|
|||
|
|||
|
Thanks bradford...
Just uploaded pics to photobucket..now just to get them here. Ok the transom questions How thick should a transom be with a bracket? Looks like the original was 2" and has a slight curve Should 1/4" marine ply flex to the outter skin? vice versa?? thinking of a 1/4' ply sandwich as follows.. outter skin glue 1/4" marine ply let cure to keep the original curve add mat & 1/4" glue & keep building up to at least 2.5?? Any input would be great. |
|
#5
|
|||
|
|||
|
Quote:
How do i get pics up?? It just keeps saying attachment isnt valid |
|
#6
|
|||
|
|||
|
Finally Pics
|
|
#7
|
|||
|
|||
|
I think i want it carolina blue or off white
|
|
#8
|
|||
|
|||
|
so the original floor was raised with poor effort.
2 x 12's where screwed to the original stringers and not glassed, floor also wasnt glassed, good thing i think i can salvage the tank It has been replaced. From what i understand, the '75 orginally had two saddle tanks?? the line made by the raised floor was even and I'll be going back to that height. I like a self bailing deck, but i will hardly ever leave it in the drink over night so not sure if i rather have the gunwale height or self bailing. mostly trailered from VA beach to South NJ chasing stripers, flounder & cobia Last edited by brywheat; 06-25-2014 at 02:54 PM. |
|
#9
|
|||
|
|||
|
|
![]() |
| Thread Tools | |
| Display Modes | |
|
|