Wellcraft V20 Community

Go Back   Wellcraft V20 Community > Wellcraft V-20 Forums > General

Reply
 
Thread Tools Display Modes
  #1  
Unread 03-13-2014, 02:44 AM
Maltsu Maltsu is offline
Junior Member
 
Join Date: Nov 2013
Posts: 3
Default

Quote:
Originally Posted by reelapeelin View Post
Do you know the condition of the inside of the fuel tank?...hope she's clean and ready for new fuel and take a close look at the vent and filler hoses to the tank...back in 1984 those were not compatible w/alcohol found in most fuels today in the states...are your fuels over there part alcohol?...even if not, make sure all the hoses are in good enough shape to provide your new motor w/top performance.
Not sure about the condition yet. I actually started by removing the fuel tank hatch and water separator filter. My plan is to renew the whole fuel line, because it doesn't make sense to risk the new motor. The hatch cover core is rotten and will redo that. Tank itself looks quite okay from top, but I'll take it off and check it out. There's some old fuel left in the tank. Pumped out about 10 gallons, but run out of canisters. Some of the fuel lines have been renewed to be compatible with ethanol. Parts of the urethan were bit soft, some were fully dry.
Reply With Quote
  #2  
Unread 03-13-2014, 10:30 AM
reelapeelin's Avatar
reelapeelin reelapeelin is offline
God
 
Join Date: Aug 2003
Location: Spartanburg, SC
Posts: 15,610
Default

Quote:
Originally Posted by Maltsu View Post
Not sure about the condition yet. I actually started by removing the fuel tank hatch and water separator filter. My plan is to renew the whole fuel line, because it doesn't make sense to risk the new motor. The hatch cover core is rotten and will redo that. Tank itself looks quite okay from top, but I'll take it off and check it out. There's some old fuel left in the tank. Pumped out about 10 gallons, but run out of canisters. Some of the fuel lines have been renewed to be compatible with ethanol. Parts of the urethan were bit soft, some were fully dry.
You're on the right track w/fuel lines and all...I've never pulled one of these tanks, but have read enough accounts here of members who have to tell you it's a painful process...unless you are SURE you have to, let me suggest you pump the rest of the old fuel out, remove the sender unit from the top of the tank and use that opening to determine if you can get it clean enough using that opening or if you gotta go ahead w/tank removal...
__________________
'74 V-20/ BF 150
'95 V-21/ BF 150
'84 V-20/ 200 2.4 Merc
'87 V-20/'18 F150 Yamaha



http://www.wellcraftv20.com/gallery/albums/MJ-hide/Iphone201205.jpg
Reply With Quote
  #3  
Unread 03-14-2014, 09:01 AM
ssiredfish's Avatar
ssiredfish ssiredfish is offline
Senior Member
 
Join Date: Dec 2010
Location: St Simons Island,GA
Posts: 913
Default

FINALLY!!! Swedish boat porn

Welcome to the brotherhood!!!
__________________
- The charm of fishing is that it is the pursuit of what is elusive but obtainable, a perpetual series of occasions for hope.

Lucky Jack - .......The Surprise is not old; no one would call her old. She has a bluff bow, lovely lines. She's a fine seaboat: weatherly, stiff and fast, very fast, if she's well handled. No, she's not old; she's in her prime.

85' Wellcraft 20 Fisherman "Guale Girl"
1979 Alumnacraft 14 - STILL got holes in it
2006 WS Tarpon160f - "Mudd Butt"
Reply With Quote
Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -5. The time now is 08:35 AM.


Powered by vBulletin® Version 3.8.2
Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.