140 hp Johnson

[THEFERMANATOR]

Originally Posted by phatdaddy

spare, is that lack of oil or overheat?
shurlock, i said harmed, not hammered, was wondering if all cyl looked the same

Look at the pistom dome, that engine LEANED OUT BAD! theres not even a trace of black carbon or soot on it. A looper should always have some sort of soot on the piston dome when they are jetted to live, and there should be some traces of wetness.

Looking at your pics it looks like a small bore engine which were ALWAYS prone to overheating due to there design. Where are you located at?

[spareparts]

Originally Posted by THEFERMANATOR

Look at the pistom dome, that engine LEANED OUT BAD! theres not even a trace of black carbon or soot on it. A looper should always have some sort of soot on the piston dome when they are jetted to live, and there should be some traces of wetness.

Looking at your pics it looks like a small bore engine which were ALWAYS prone to overheating due to there design. Where are you located at?

what he said

[shurlock]

all other cylinders heads had carbon dust all over them, wish I took more pictures before I put it all back together. maybe a little scoring on one other cylinder but nothing like that one.

[shurlock]

jumping on and off forum, some of my posts are from my phone. while dealing with kids ranging from 5 to 18 years old 4 in total. I live in south Florida.

[bradford]

There's a guy in Zephyrhills that works on those who knows his chit.

[THEFERMANATOR]

Originally Posted by bradford

There's a guy in Zephyrhills that works on those who knows his chit.

I might still have a good 140 powerhead outside to.

[randlemanboater]

Originally Posted by THEFERMANATOR

I might still have a good 140 powerhead outside to.

There you go.