Mods on my tow pig

[smokeonthewater]

I had an old air tank from a semi and I bent up some brackets n hardened by heating w a torch n dropping them into a bucket of water a few times.

air18.jpg
air19.jpg
air20.jpg
air21.jpg
air22.jpg

[smokeonthewater]

The autometer gauges I installed in the F650 lower dash.... Pyro, boost, and air pressure
air23.jpg

Still waiting on most of my parts to arrive


__________________________________________________ __________________________________________________ __________________________


Ok well it has been stupid cold and getting colder but I managed a little more progress today... no more pics yet but I got my regulator, 3 way valve, and mirror heat switch today. I got the wiring run through the dash,into the doors, and hooked up to the mirrors for both mirror heat, and the mirror turn signals. I also got the wiring (power, ground, and illumination) for the heat switch all done and have wiring in place to build the rest of the switch harnesses as the switches show up and I see what each needs.
I also got the 3-way (dump) valve plumbed in and wiring connected to it and was able to test it... Works GREAT... Very pleased with it.
Same with the regulator except that I need to go pick up a couple of 90 degree fittings for the air lines on it as the straight fittings pointing opposite directions would make routing the lines a pain. I was able to mock it up and test it and I'm very happy with it as well.
No new pics yet but soon