Radar installed

[reelapeelin]

That IS a nice V..and the lift is so much better alternative to bottom paint...on many levels..

[000's]

I really like the 740s like you said fast and easy to use. Hopefully I will finish up wiring on the radar. Get the riggers on and get ready to start killing the following weekend. I will post some pics on Monday of the riggers and a screen shot of the radar.

[inaforty]

Looking forward to the pictures.
Not much boating to around here now.
It's 38 degrees here right now. I got the wood stove keeping us warm.

[000's]

Ok sorry for the delay of pics, but after being the winner of THE DUMD *** AWARD I just finished the wiring last night.

Just an FYI when splicing cat5 cable DO NOT STRIP THE ENDS OF THE WIRE. I have never messed with it, so like any other wiring project ,strip the wire, install the wire nut etc., in this case, slide the end on ,crimp ,plug in, then the radar works.

Oh hell no. Spent all day trying to find the problem, on the phone with tech support, was getting ready to start replacing all the wiring. My wife was looking at a cat5 cable in the office and said this wire was not stripped. Man a light bulb went off and hour later. When I stripped the ends of the wire the were frayed, when the plug was installed all of the ends were touching one another and caused it not to work.

Thought you would enjoy the story. I will clean up the mess and get the riggers on this week and will post some pics.

[000's]

photo 1.jpg

photo 2.jpg

photo 3.jpg

photo 4.jpg

95% Ready to start fishing ,Always something to do. Radar is up and running. All we need is for the fish to cooperate.

[inaforty]

That's one of the best looking V's I have ever seen.
Looks like it came from factory rigged like that.

[willy]

Gorgeous V20 000, well done

[Destroyer]

Originally Posted by 000's

Ok sorry for the delay of pics, but after being the winner of THE DUMD *** AWARD I just finished the wiring last night.

Just an FYI when splicing cat5 cable DO NOT STRIP THE ENDS OF THE WIRE. I have never messed with it, so like any other wiring project ,strip the wire, install the wire nut etc., in this case, slide the end on ,crimp ,plug in, then the radar works.

Oh hell no. Spent all day trying to find the problem, on the phone with tech support, was getting ready to start replacing all the wiring. My wife was looking at a cat5 cable in the office and said this wire was not stripped. Man a light bulb went off and hour later. When I stripped the ends of the wire the were frayed, when the plug was installed all of the ends were touching one another and caused it not to work.

Thought you would enjoy the story. I will clean up the mess and get the riggers on this week and will post some pics.

They even make special RJ45 ends now that you just insert the wires straight thru them and out the front side..This way you can check and make sure your wires are in the correct order, whether you're wiring a 568A, B or crossover cord. Once you've checked your order, and you've crimped the connector, all you do is snip the wires coming out and you're done. No more straining your eyes trying to see the color codes through the connector.
And yes, that's a great story.

[Blue_Runner]

Jealousy abounds over all those rod holders on that top!

[SkunkBoat]

I have rodholder envy also!