Starter Question

[Destroyer]

Originally Posted by smokeonthewater

just so we don't assume anything... when you went through it you DID make sure the brushes moved freely in their slides and that there was no side play in the bearings?

BTW THANKS for the pics... I would LOVE to make my kicker e-start and was wondering what all was different.

Happy to help on the pics. Not alot really different. My guess is the pull starter might need to be changed, (there are several of them for sale on eBay) and if your flywheel doesn't have gear teeth you'll need a different flywheel and some kind of starter button/switch installed. if you look at pic two (the one with the cowl off, you see that red button. That's the stop button... next to it on the left is the starter button. You can only access it with the shift lever in neutral, which is why it has that weird cutout in it.

As to the brushes, yes, they are free in their slides and the bearings are good, no obvious wear, and the rotor spins freely in them without any obvious side to side motion.

I bought the starter that Ferm found and posted in this thread, along with the entire lower leg. Mine is starting to show corrosion, and his looks much better (he sent me additional pics). (THANK YOU FERM)!!! So we'll see where this goes in a few days. It's being shipped 3 day fed ex, so I should get it by this weekend and I'll know by then what the score is.