rebuilding my V

[macojoe]

From what I have heard you CAN NOT Pour that stuff on the wood, you must remove all wood first! I have heard, I have never used the stuff myself.

[cterrebonne]

Originally Posted by macojoe

From what I have heard you CAN NOT Pour that stuff on the wood, you must remove all wood first! I have heard, I have never used the stuff myself.

I did read that too. My idea was to cut the very tops off the stringers and then use an electric chain saw to cut out the old stringers if they don't want to come out easily.

I hope that works, but if it doesn't I might have to use the arjay just in the transom and then replace the stringers with marine tech ply and epoxy.

[cterrebonne]

well finally today I was able to run into NOLA and get my PT Marine Tech Ply. I have been waiting a long time for the stuff to come in and for me to be able to run into the city and pick it up. I was also able to source some arjay from a distributor in nola. Should be in next week.

So I decided that I am goisng to use my existing fiberglass skins as a mold to pour a 1.5" arjay transom. I think 1.5" would workl because I am going to glass some knees in to the stringers and transom.

Anyway here's my score today.