Wellcraft V20 Community

Go Back   Wellcraft V20 Community > Wellcraft V-20 Forums > Performance

Reply
 
Thread Tools Display Modes
  #1  
Unread 05-19-2013, 06:17 AM
bgreene bgreene is offline
Banned
 
Join Date: Jul 2005
Location: Cherry Hill, NJ
Posts: 6,461
Default

Quote:
Originally Posted by Genie Aye View Post
First--200HO is 510lbs
200 is 418lbs

100lbs to small block

The 200HO is also 218 hp at the prop.

The speed difference should not be more then 5 to 7 mph I would think.

Question is --how fast do you want to go???

With mine loaded for tuna--means ice--alot-Fish hold full, gear, food, 30 gallon bait tank full of water, people and 70+ gallons of fuel with arch and stand up top--I can run 49+ agianst a good 15 knot head wind--Best I have seen is 53+ with the 200HO. Faster than I need to go most of the time on Saltwater. But it does cruise real easy at 35 to 40 and not even work with the heavy load.
What prop are you using - Rebel, Viper, other ?
Reply With Quote
  #2  
Unread 05-21-2013, 12:07 AM
Genie Aye's Avatar
Genie Aye Genie Aye is offline
Senior Member
 
Join Date: Sep 2009
Location: Renton,Wa./Westport,Wa.
Posts: 319
Default

Rebel 15.25 x 19 SS

Just let the torque do the work.
__________________
88 V-20
200 G2
Reply With Quote
  #3  
Unread 06-22-2013, 08:34 PM
bgreene bgreene is offline
Banned
 
Join Date: Jul 2005
Location: Cherry Hill, NJ
Posts: 6,461
Default

Quote:
Originally Posted by Genie Aye View Post
Rebel 15.25 x 19 SS

Just let the torque do the work.
Genie - not sure how you're doing it, but whatever ..........that's impressive .

My 200 HO with the 18" Rebel is turning 5,300 rpm, so I'm going to drop to the 17" to get the motor spinning more freely............. likely 5,600 +/-.
Top speed with 3/4 fuel and two on board was about 46 mph, so I hope to pick up 2-4 mph with the revised prop.
I'm very impressed with total performance- from starting, trolling, mid range.
Reply With Quote
  #4  
Unread 06-22-2013, 08:42 PM
Genie Aye's Avatar
Genie Aye Genie Aye is offline
Senior Member
 
Join Date: Sep 2009
Location: Renton,Wa./Westport,Wa.
Posts: 319
Default

are you trimmed out to the max? I am when running the top speed I stated. also the height of the motor on the transom--I raised it one hole from where they mounted it and have a 5 degree shim in there as well.
__________________
88 V-20
200 G2
Reply With Quote
  #5  
Unread 06-23-2013, 06:06 AM
bgreene bgreene is offline
Banned
 
Join Date: Jul 2005
Location: Cherry Hill, NJ
Posts: 6,461
Default

Was trimmed out, tabs up. Could be engine height, so first I'll go with the 17" Rebel and re test. Ran out of back bay room to check the cavitation plate - see if it was below water or just above.
Reply With Quote
Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -5. The time now is 12:48 PM.


Powered by vBulletin® Version 3.8.2
Copyright ©2000 - 2026, Jelsoft Enterprises Ltd.