Your model number is for a 90 degree crossflow engine. The 87 lower should swap onto it as I don't think OMC made any crankshaft changes to the V-4's as they were gearing up for the 60 degree loopers by then. Just make sure the shift shaft has the same shape to it as your old one. there were some changes to the shift shafts made through the years, but they unthread from the lower and can be swapped. Also you have to make sure and set the height on the shift shaft before you reinstall the lower unit. If the length on it isn't correct it will not shift correctly.
__________________
2011 SUNDANCE B20CCR SKIFF, 2011 YAMAHA 90HP 4 STROKE, 2011 KARAVAN SINGLE AXLE ALUMINUM TRAILER, LOWRANCE ELITE-7 HDI, MINN KOTA RIPTIDE TROLLING MOTOR
2000CC HYDRA-SPORT 225+HP EVINRUDE SOLD 
AND THE PINK JEEP!!!! R.I.P.
http://www.wellcraftv20.com/communit...ad.php?t=11664
|
Hybrid Mode
