|
|
|
|
#1
|
||||
|
||||
Got to do a little sanding on the bottom paint today. It is much easier on a flipped hull. Got about half of the port(?) side done. The entire keel is still covered with bottom paint. And it is the worst. My plan to tackle the keel is 40 grit paper and a big fan. This paint is 3/16" thick in spots. I have been chiseling off the thickest and sanding. I just wonder how much weight I am removing. Not to mention all the gel coat damage I have uncovered.
__________________
1983 V-20 capsized. . . . in the garage. 
|
|
#2
01-13-2013, 05:43 PM
|
||||
|
||||
|
So far the wood chisel is the best tool for removing this paint. Takes quite a bit of elbow grease but its coming off! Working the keel now. Got the bulk off both sides and just have around the strakes left.
__________________
1983 V-20 capsized. . . . in the garage.
|
 |
| Thread Tools | |
| Display Modes | |
|
|
Hybrid Mode
