Wellcraft V20 Community

Go Back   Wellcraft V20 Community > Wellcraft V-20 Forums > General

Reply
 
Thread Tools Display Modes
  #1  
Unread 12-10-2012, 09:43 PM
randlemanboater randlemanboater is offline
God
 
Join Date: Jun 2007
Location: Central NC
Posts: 5,868
Default

Dream boat is all I can say!
__________________
***************************************

Stay Safe!




Sold - 1984 V-20 Cuddy with a 2003 Johnson 140 hp gas sippin 4-stroke.

1995 Ranger 250C with a 2015 Suzuki 300 hp 4-stroke.
Reply With Quote
  #2  
Unread 12-10-2012, 10:20 PM
THEFERMANATOR's Avatar
THEFERMANATOR THEFERMANATOR is offline
God
 
Join Date: Dec 2006
Location: Zephyrhills Fl
Posts: 7,206
Send a message via AIM to THEFERMANATOR
Default

Personally I would look for another 28 BERTRAM over that one. It's a good al laround boat, but it will not do what the BERTRAM could by a LONG shot. The 2470 is the older 2350 with the built in euro transom. The hours on the engines seems a little low to me, and that would actually worry me if it is origanal hours(28.4 hours a year isn't very much useage to me). If everything checks out it is worth what he's asking, just not my cup of tea. Personally I think you will be seriously disapointed in the ride of it after having ridden in the 28 BERTRAM.
__________________
2011 SUNDANCE B20CCR SKIFF, 2011 YAMAHA 90HP 4 STROKE, 2011 KARAVAN SINGLE AXLE ALUMINUM TRAILER, LOWRANCE ELITE-7 HDI, MINN KOTA RIPTIDE TROLLING MOTOR

2000CC HYDRA-SPORT 225+HP EVINRUDE SOLD

AND THE PINK JEEP!!!! R.I.P.
http://www.wellcraftv20.com/communit...ad.php?t=11664
Reply With Quote
  #3  
Unread 12-10-2012, 11:39 PM
willy's Avatar
willy willy is offline
God
 
Join Date: Jul 2005
Location: new jersey
Posts: 9,406
Default

Appreciate the input Ferm. But decided to go with a CC. Turns out no one to hang at the boat for over nighters like I thought I would have. So I decided to go with an offshore capable CC, preferably with twins.
Everything I can find on this hull and engines say top flight and incredible construction and performance.
And I will be able to get off shore for tuna etc. up here but mostly have a really good ride for the 90 % of the fishing I do through a rough chop we deal with in my inshore fishing.
Everything I have found concerning the engines says excellent.
Everything I can find on the ride and construction of this hull says excellent.
So the combo says good to go for me.
No it is not a Bertram 28, but from what I can find it is a really great CC for the 98% I do do.
__________________
Willy
1986 V20 Old School
1992 V20 1992 150 Yamaha
1997 HydraSport 2250 Vector
2009 17' G3 Outfitter "G Spot"
http://www.youtube.com/watch?v=TDebw...eature=related
"I won't be wronged, I won't be insulted and I won't be laid on a hand on. I don't do these things to others and I require the same from them" JW
Reply With Quote
  #4  
Unread 12-10-2012, 11:46 PM
willy's Avatar
willy willy is offline
God
 
Join Date: Jul 2005
Location: new jersey
Posts: 9,406
Default

And as far as hours go I agree.
But the original owner was an older Gent who used the boat as a cruiser in the Indian River (fresh water) and the second owner was another older fellow friend who used it in the same area, for the same thing. The boat has been on an rack storage thing its whole life.
I am kinda happy for that.
The survey shows that it is in excellent shape.
2007 trailer that is like new.
I dunno, seems pretty good to me for what I want.
__________________
Willy
1986 V20 Old School
1992 V20 1992 150 Yamaha
1997 HydraSport 2250 Vector
2009 17' G3 Outfitter "G Spot"
http://www.youtube.com/watch?v=TDebw...eature=related
"I won't be wronged, I won't be insulted and I won't be laid on a hand on. I don't do these things to others and I require the same from them" JW
Reply With Quote
  #5  
Unread 12-10-2012, 11:50 PM
willy's Avatar
willy willy is offline
God
 
Join Date: Jul 2005
Location: new jersey
Posts: 9,406
Default

What I need is a good mechanic who can check out those engines for me in the Jacksonville Fla. area Check out the lower unit and compression etc.
__________________
Willy
1986 V20 Old School
1992 V20 1992 150 Yamaha
1997 HydraSport 2250 Vector
2009 17' G3 Outfitter "G Spot"
http://www.youtube.com/watch?v=TDebw...eature=related
"I won't be wronged, I won't be insulted and I won't be laid on a hand on. I don't do these things to others and I require the same from them" JW
Reply With Quote
  #6  
Unread 12-11-2012, 12:54 AM
THEFERMANATOR's Avatar
THEFERMANATOR THEFERMANATOR is offline
God
 
Join Date: Dec 2006
Location: Zephyrhills Fl
Posts: 7,206
Send a message via AIM to THEFERMANATOR
Default

Quote:
Originally Posted by willy View Post
What I need is a good mechanic who can check out those engines for me in the Jacksonville Fla. area Check out the lower unit and compression etc.
I think awthacker is in that area? Have you tried asking on THT? It's a 3 hour drive for me, orelse I owuld go and do it for you(unless you want to ask him to come down to Tampa with it).
__________________
2011 SUNDANCE B20CCR SKIFF, 2011 YAMAHA 90HP 4 STROKE, 2011 KARAVAN SINGLE AXLE ALUMINUM TRAILER, LOWRANCE ELITE-7 HDI, MINN KOTA RIPTIDE TROLLING MOTOR

2000CC HYDRA-SPORT 225+HP EVINRUDE SOLD

AND THE PINK JEEP!!!! R.I.P.
http://www.wellcraftv20.com/communit...ad.php?t=11664
Reply With Quote
  #7  
Unread 12-11-2012, 08:41 AM
Seacrets Seacrets is offline
Senior Member
 
Join Date: Feb 2004
Location: Steinhatchee, Fl.
Posts: 889
Default

Call the marina. The number is on the side of the building and ask about an engine survey. They may know somebody. Excellent boat. Personally, I wouldn't hang anything but a Yamaha on my boats. The majority of the commercial guys can't be wrong. Boat is built in Ft. Pierce. Great reputation.
Reply With Quote
  #8  
Unread 12-10-2012, 11:49 PM
THEFERMANATOR's Avatar
THEFERMANATOR THEFERMANATOR is offline
God
 
Join Date: Dec 2006
Location: Zephyrhills Fl
Posts: 7,206
Send a message via AIM to THEFERMANATOR
Default

It is a good all around hull. It doesn't have alot of dead rise to it, so it won't be a speed demon in the rough, but it will drift pretty good. The engines are good, just make sure to take them to somebody who knows and understands teh OX66 engines. They are good engines, but the VST's need regular service, and the O2 sensors in it also need regular maintence to avoid engine trouble. With the low hours, I would be more concerned about injector issues as low useage normally tends to lead to stuck injectors or carboned rings which takes out alot of low hour engines. Make sure to THOROUGHLY decarbon it with those low hours as I would be willing to bet it has some hard carbon buildup in the ring lands just waiting to stick a ring. PURSUIT does make a good hull, and this one is EASILY trailerable to so you can get it out and away from the storm next time. In all honesty though, it will be pretty close to your HYDRA-SPORTS you got rid of as this is only a 23 foot hull that actually rides in the water, and an 8 1/2 foot beam VS the HYDRASPORTS 8' 2" beam that you had.

Have you considered a DUSKY 233 or 256? For your fishing area, I think it would suit you better with the large carolina bow flare, moderate deadrise, sharp bow entry, and just a hard core fishing design. nothing agaisnt the PURSUIT as I know it is a quality built vessel, but I fall into the category that feels they are overpriced.
__________________
2011 SUNDANCE B20CCR SKIFF, 2011 YAMAHA 90HP 4 STROKE, 2011 KARAVAN SINGLE AXLE ALUMINUM TRAILER, LOWRANCE ELITE-7 HDI, MINN KOTA RIPTIDE TROLLING MOTOR

2000CC HYDRA-SPORT 225+HP EVINRUDE SOLD

AND THE PINK JEEP!!!! R.I.P.
http://www.wellcraftv20.com/communit...ad.php?t=11664
Reply With Quote
Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -5. The time now is 06:39 AM.


Powered by vBulletin® Version 3.8.2
Copyright ©2000 - 2026, Jelsoft Enterprises Ltd.