Arjay for stringers

[bksah2]

By the time you buy the wood the fiberglass and the epoxy...the Arjay may not really cost thats much..the one question i would have is my understanding is that when putting in new stringers,, the wood is not to touch the inner hull because it creates Hard Spots so if you use the Arjay and pour it in how are you going to keep it off the hull or does it really matter

[Kracker Jack]

My stringers were bedded the entire length with thickened poly. Meanining its bedded with even pressure thru the entirety of the length of the hull. You can't cut wood stringers perfect ,so if you cut the stringers a layed them in place on the surface of the hull one part of the stringer would touch the hull surface before another part of the stringer creating a head spot. In the case of a pourable system such as ARjay you are dealing with consistent even pressure thru the length of the hull.