![]() |
|
|
|
#1
|
||||
|
||||
|
Its 74" long at the gunnel, with the cap out of the hull it all looks out of proportion. Once I drop the cap back in, I will mount the mock up again. This was just to see how it would flow with the lines. Its 6' 3" headroom inside. Windows are 24" tall. I would like to make it longer butbI believe once the roof and front window mock is mounted, that It will all look better. Its really a simple design. The most complicated part is the actual windshield opening for the cuddy slide.
__________________
1983 V-20 capsized. . . . in the garage. |
|
#2
|
||||
|
||||
|
I'm w/MJ...I like that exact profile...how much overhang you planning all around?...
__________________
'74 V-20/ BF 150 '95 V-21/ BF 150 '84 V-20/ 200 2.4 Merc '87 V-20/'18 F150 Yamaha |
|
#3
|
||||
|
||||
|
Reel I really have not thought about overhang. Maybe 8-10" front and back and 4" on the sides? I like the profile but I may drop the cap back in the hull to check how propportioned it is. I may go back another two feet and make it longer. But I am already over the gunnel rod boxes, I do not want to take all my back deck yet, without the back and door on that is full access shade that I can fish from. I need some opinions on making it longer. Thanks for the comments everybody.
__________________
1983 V-20 capsized. . . . in the garage. |
|
#4
|
||||
|
||||
|
Reel you got me thinking, what about just doing a two foot rear overhang on what I have now?
__________________
1983 V-20 capsized. . . . in the garage. |
|
#5
|
||||
|
||||
|
That's REELY why I asked about about overhang...like me, you sound concerned about taking up floor space...I don't know your priorities in the outcome of this project...shade or cockpit space?...or other?...two feet out sounds excessive to me, but might be just right for you...when holding pressure on a fish, that rods gotta have plenty of room to be held STRAIGHT UP...and my concern is too much out the back will be restrictive when it counts...but again, that's me..you may have other priorities...
__________________
'74 V-20/ BF 150 '95 V-21/ BF 150 '84 V-20/ 200 2.4 Merc '87 V-20/'18 F150 Yamaha |
|
#6
|
||||
|
||||
|
I have been running that scenario through my head also. I love to drift fish over reefs and wrecks. But my main goal with this build is bluewater fishing. Even having Bluewater V20 decals made. I am looking at trolling for wahoo, tuna, and my ultimate goal is a swordfish. Thinking about it, yeah its all around fishing types. I have never held a rod straight up with a fish on except when its boat side and we want to stick it with the gaff. I would also like to get back into King Tournament fishing. I will have to do a mock up of my roof and see how it works. Something else, is a V20 stable enough to mount a crows nest? Or do yall think that will be too dangerous?
__________________
1983 V-20 capsized. . . . in the garage. |
|
#7
|
||||
|
||||
|
A lot of cc don't have a ton of space in the rear of the boat. The overhang will be nice, but you only need enough to let the water run off, and not down your back when under way. For shade get a good hat! I love my hard top, never have to wear a hat anymore, but it can get in the way when casting a lot, but I do most all bottom fishing.
As far as a crows nest, It has been done on the V20, and we have seen some pic's, but know one has ever said how they go?? I would think a small lower type might not be to bad, but if you make one to high you going to have issues. You know what would be nice, a sunroof in your pilot house with a small ladder to step up on, stick your head out the top and get a great view without building anything to high?? Just popped in my head as I am typing. Whatever its coming out great!! Keep it going you have a whole winter to go before you need it.
__________________
1986 V20 ![]() Old Fishermen never die, we just SMELL that way!! |
![]() |
| Thread Tools | |
| Display Modes | |
|
|