|
|
|
|
#1
|
||||
|
||||
 Well kinda mocked her up so I can take some measurements so I took some pics.  Here's another pic. I can't wait to put this boat together for good. 
|
|
#2
10-13-2012, 03:09 PM
|
||||
|
||||
|
Stupid question, have you replaced the bow eye yet? I have yet to own an old boat that did not eventually need one. Plus that will bug the crap out of you being the only hardware that wasn't replaced....
__________________
1983 V-20 capsized. . . . in the garage.
|
|
#3
10-14-2012, 03:07 PM
|
||||
|
||||
|
Quote:
|
|
#4
10-14-2012, 03:15 PM
|
||||
|
||||
 Here she is all glassed up with a single layer of 1708. If you look closely at the opening on the console you will see a 3/4 ply band that that wraps the opening I did this to create shear strength in the console for the purpose of the t-top getting bolted to it. The console orginally was just a mold and really had no horizontal strength. I'm also gonna glass a piece of 3/4 ply 12"x16" to mount fuse panels and battery switches and other electrical knick knacks
|
|
#5
10-15-2012, 10:01 PM
|
|||
|
|||
|
Coming along nicely!
I always make a point to wipe off the dripping resin with a rag with some solvent on it. Makes it a lot easier than sanding it off.
__________________
84' Wellcraft Fisherman 18 / 96' Evinrude 130-Sold 20' Fisherman project underway www.ParkerFenceandDeck.com
|
|
#6
10-17-2012, 07:37 PM
|
||||
|
||||
|
Hey guys I need some opinions. I'm thinking of glassing my console down to the deck and not using screws or fasteners. What's yalls opinions on this. I see a lot of guys on other forums doing this.
|
|
#7
10-17-2012, 09:46 PM
|
||||
|
||||
|
Kracker, I say get your console exactly where you want it then glass it down. If properly done, you will have a much more solid connection. Less vibration too. I am glassing the cap to my hull when it goes back together for these reasons.
__________________
1983 V-20 capsized. . . . in the garage.
|
|
#8
10-18-2012, 07:39 AM
|
||||
|
||||
|
Quote:
__________________
'74 V-20/ BF 150 '95 V-21/ BF 150 '84 V-20/ 200 2.4 Merc '87 V-20/'18 F150 Yamaha 
|
 |
| Thread Tools | |
| Display Modes | |
|
|
Hybrid Mode
