|
|
|
|
#1
|
||||
|
||||
 So I decide if I'm gonna do this boat then I'm gonna do it right the first time. Even though the hull is built like a moose I also decide to recore the half rotted core ply on my console. I cut from the top because I'm gonna glass over the whole top anyway. Iwill then flip it over and patch those steering and control holes from the bottom with some progressive patchs of CSM. 
|
|
#2
10-11-2012, 06:03 AM
|
||||
|
||||
|
On the glassing of the console/recore, sounds good to me. I need to do the exact same thing with my raised casting deck.
BTW - It does get interesting trying to stand up there while trying to anchor. Love the anchor locker drain too. Small details make all the difference. Whaler's anchor locker drain was like 3/16" inside diameter, it stayed plugged up. On the Wellcraft, I stepped up to a 1" drain with the Perko Chrome vent over the top.
__________________
 1996 -19' NV Flats 115 Mercury 4-stroke 1983 -20' Wellcraft Center Console 250 XS
|
 |
| Thread Tools | |
| Display Modes | |
|
|
Hybrid Mode
