|
|
|
|
#1
|
||||
|
||||
I have guid on's with lights like these, THIS IS NOT ME!! I never woukd get that deep in the water and I have a 23 footer!!
 West Marine and, I am sure others sell Self Centering Rollers also, I know a guy that swears by them. It the bottom roller in this picture. And as spare said we can help you convert to bunks if you want to!! There are plenty here and other places that have done it. http://www.westmarine.com/webapp/wcs...2#.UG-DBpjA8l9
__________________
1986 V20  Old Fishermen never die, we just SMELL that way!! 
|
|
#2
10-05-2012, 08:54 PM
|
||||
|
||||
|
I see this question a LOT... 99% of the time the person is backing WAY too far into the water and 95% of those are SURE that that isn't the problem.... Otherwise the next step is adjustment and if that doesn't work (my V loads VERY easily on my ez loader full roller trailer) then the final best option is usually to sell a perfectly fine roller trailer an buy a bunk trailer.... almost always cheaper than converting.......
If after all of this the trailer won't work for you and you are stubborn enough to insist on converting then we'll help you through it.
|
|
#3
10-06-2012, 08:23 AM
|
||||
|
||||
|
From what I've seen, it pretty much depends on the ramps you use as to whether you need bunks or rollers...deeper ramps allow drive-on bunks and shallower ramps require winch-on rollers...are you driving onto a roller style trailer?...I'm not familiar enough w/rollers to say for sure, but Rob and Pete used their winches to load their rollers and I'm not sure you can drive on one w/good result...maybe the guys w/rollers can clarify...
__________________
'74 V-20/ BF 150 '95 V-21/ BF 150 '84 V-20/ 200 2.4 Merc '87 V-20/'18 F150 Yamaha 
|
|
#4
10-06-2012, 09:36 AM
|
||||
|
||||
|
I have always had a roller trailer, and in the begining with the V had a hard time loading. But after a few years of doing it and learning it got easy, Now I would never have it any other way!!
I line up the boat with the trailer drive it on mos of the way, Kenny hooks the winch cable and winch does the last 3 or 4 feet, works everytime! I back trailer in right to the bottom of the fenders, any more the back will float off the back making a uneven load.
__________________
1986 V20 Old Fishermen never die, we just SMELL that way!!
|
|
#5
10-06-2012, 01:35 PM
|
||||
|
||||
|
Quote:
MJ, I think your point about finding the right depth for the trailer is key to getting her loaded right...and I've always been able to load mine alone if need be, but havin' a second person slicks the process out REEL nice like...
__________________
'74 V-20/ BF 150 '95 V-21/ BF 150 '84 V-20/ 200 2.4 Merc '87 V-20/'18 F150 Yamaha
|
|
#6
10-06-2012, 02:36 PM
|
||||
|
||||
|
with my old carver santa cruz on an ezloader full roller I drove it on all the way and hooked the winch.... the v, I have only launched twice but it went on perfectly both times the same way....
|
 |
| Thread Tools | |
| Display Modes | |
|
|
Hybrid Mode
