Va Beach v20 project

[draglink]

UL - the above picture is a 'Stainless Marine' bracket on a V.

A Sea Drive was built by OMC for a few years. It has the "bracket" built into the lower part of the motor

SeaDrive:

[Union Laker]

Originally Posted by draglink

UL - the above picture is a 'Stainless Marine' bracket on a V.

A Sea Drive was built by OMC for a few years. It has the "bracket" built into the lower part of the motor

SeaDrive:

Right I thought the Brackets were sea drives .I hate those Bracket only way to go I thought the bracket was the sea drive. I like them can't believe I thought for the last 25 years Brackets were sea drives..

Thanks for the old schoolin...

[Union Laker]

Hey Kracker you ready for some primer yet? I jjust got a 2 gallon kit from SPI

Barry has free shipping 2 part Epoxy 1-1 mix. I will let ya know how she lays down.

Now what all is the best top coat?.....What were you thinking ,

[Kracker Jack]

Originally Posted by Union Laker

Hey Kracker you ready for some primer yet? I jjust got a 2 gallon kit from SPI

Barry has free shipping 2 part Epoxy 1-1 mix. I will let ya know how she lays down.

Now what all is the best top coat?.....What were you thinking ,

Union, there's a lot of DO IT YOURSELF paints out there. The sides of my outer hull are gonna be Interlux perfection in a fighting lady yellow color, my bottom is gonna be a interlux VC performance EPOXY, My inner hull I'm tossed up on but I'm leaning towards rolled on gellcoat, giving the boat a work boat finish inside. I have 2 gallons of interlux epoxy primer already. I'm working on the boat Saturday and Sunday I have been working 70 hour weeks lately so I've been kinda busy at work.

[Kracker Jack]

Finally working on the boat today. I really wanted to go fishing,the puppy drum are snapping right now. I set and glued the last part of my inner rail today and I'm gonna glassind them up tommorow. Next will be glueing and setting the top cap and then glassing over the whole cap to rail structure. Im really looking forward to fairing and slicking her up.

[Kracker Jack]

By far the most challenging layups I've done so far!!! Tight radias with multiple inside corners and tabs. I can't wait till these inner rails are done.

I also recieved a bonus today, I traded some spreader lights for a vhf radio and a raymarine rc420 chartplotter today!!!!! It was one of those situations were my buddy wanted spreader lights and he had what I needed, he's happy and I'm very very happy with the trade.

[draglink]

Come on Kracker, youre holding out on us....give us some PICTURES!!!