![]() |
|
|
|
#1
|
||||
|
||||
![]() this is what you would see if looking aft under the fishbox. i have an 83 cuddy o/b in which the fishbox is midship and the fuel tank toward the stern. ![]() this is looking toward the bow at the bulkhead under the cabin door. the problem with just blowing the drain open from the stern is it will probably just stop up again. i had to install a hatch to get in there and clean out debris that washed down the drain in the well in the cuddy. ![]() also a great place to store wet, bulky items
|
|
#2
|
||||
|
||||
|
Ok.. I see, thanks for the great pics.
Where did you get that hatch? My tank is before the live bait well, my boat says it an 85 but the eng could be an 87?
__________________
1985 Wellcraft v20 Step up Cuddy 3.7 L4 Merc 165 Hp |
|
#3
|
||||
|
||||
|
i got the hatch at west marine, made by tempress. it has not held up very well. that pic is a few years old, i have since replaced it with another just like it, and this one is holding up better. my kids are older and don't constantly jump down on this one. bomar makes some also.
|
|
#4
|
||||
|
||||
|
This is the hatch I installed on my 21 when I redid the floor last winter. It's either a Rabud or a Jim Black. (Don't really remember) Point is there's lots of things you can do for access to under your floor without having to tear out the entire area.
![]() ![]()
__________________
1987 V20 w/1987 150HP Yamaha on a Shoreland'r Trailer 1978 16.5 Airslot w/1996 120HP Force on a Four Winns trailer 1996 V21 w/1993 200HP Mercury on a Shoreline Trailer All towed by a 5.7L Hemi Durango. If God didn't have a purpose for us we wouldn't be here, so Live simply, Love generously, Care deeply, Speak kindly. (Leave the rest to God) ![]() Silence, in the face of evil, is itself evil. Not to speak is to speak, not to act is to act. God will not hold us guiltless. |
|
#5
|
||||
|
||||
|
Ok real quick cause I keep losing internet after typing long posts ;(
You can try removing the aluminum threshold from the cuddy doorway. That will get you a 1 to 2 inch gap to get a wire hanger down there. If that doesn't work- If you don't want to cut the main deck for a hatch, put a small round access port in the vertical wall of the cuddy well.
__________________
1984 V20 "Express" & 2003 Suzuki DF140 (SOLD!) 2000 GradyWhite 265 Express YouTube/SkunkBoat https://www.youtube.com/channel/UC4F...znGospVOD6EJuw Transom Rebuild https://www.youtube.com/watch?v=EEz94NbKCh0 https://www.youtube.com/watch?v=Oe_ZmPOUCNc |
|
#6
|
|||
|
|||
|
My 84 (AKA-best year) has the pipe ...a long stiff wire from the back in combo with some water hosed into the drain might do it without cutting anything...if your has the pipe.
__________________
*************************************** Stay Safe! Sold - 1984 V-20 Cuddy with a 2003 Johnson 140 hp gas sippin 4-stroke. 1995 Ranger 250C with a 2015 Suzuki 300 hp 4-stroke. |
|
#7
|
||||
|
||||
|
skunk, if you cut a hole in the well in the cabin, you can only get to the bulkhead under the door, about a 1/2 inch gap. 83 cuddy
|
![]() |
| Thread Tools | |
| Display Modes | |
|
|