Wellcraft V20 Community

Go Back   Wellcraft V20 Community > Wellcraft V-20 Forums > Performance

Reply
 
Thread Tools Display Modes
  #1  
Unread 07-12-2012, 08:04 AM
Cam's Avatar
Cam Cam is offline
Senior Member
 
Join Date: Apr 2009
Location: Staten Island, NY
Posts: 508
Default

Some motors call for it and some do not.....
__________________
1987 V20
1996 Jonhson 150 OceanRunner
Reply With Quote
  #2  
Unread 07-14-2012, 06:24 AM
Joker2's Avatar
Joker2 Joker2 is offline
Senior Member
 
Join Date: May 2009
Location: Long Island, NY
Posts: 269
Default

I was wondering any opinions on two things. How does this gas consumption sound -- 20 minutes (no wake) each way in and out of channel, 3 hrs nonstop tubing with 5 kids 2 adults, food, drinks, ( got 5400 RPM's ) gear put in 11 gallons before trip 89 octane. Fuel gauges were right back where I started when I was done. Now my other question, I have been hearing a chattering at 3000 RPM and above, had engine cover off and I put my head right next to block and i didn't hear it, sounds like it is coming from the lower unit. It is driving me nuts. I have VRO, lines are only two seasons old. I topped off my oil tank at the beginning of the season, it has hardly moved, I have put approx. 8-10 hrs. on engine. Can the noise be that the engine isn't getting enough oil at higher RPM's. I would think if wired up right there would be an alarm or it would'nt allow higher rpm's? I am afraid I might be further damaging something. Any thoughts
__________________
Tight Lines !!

Last edited by Joker2; 07-14-2012 at 01:12 PM.
Reply With Quote
  #3  
Unread 07-14-2012, 07:09 AM
Cam's Avatar
Cam Cam is offline
Senior Member
 
Join Date: Apr 2009
Location: Staten Island, NY
Posts: 508
Default

I figure that according to this calculator, at 50:1 mixture, you should have used 28 ounces of oil..

http://www.csgnetwork.com/oilfuelcalc.html

This is why most of the guys here hate the VRO and disconnect it and add oil directly to the tank with the gas at fillups.
__________________
1987 V20
1996 Jonhson 150 OceanRunner
Reply With Quote
  #4  
Unread 07-14-2012, 07:12 AM
Joker2's Avatar
Joker2 Joker2 is offline
Senior Member
 
Join Date: May 2009
Location: Long Island, NY
Posts: 269
Default

I was leaning towards doing that anyway, is it complicated to do ?
__________________
Tight Lines !!
Reply With Quote
  #5  
Unread 07-14-2012, 07:48 AM
Cam's Avatar
Cam Cam is offline
Senior Member
 
Join Date: Apr 2009
Location: Staten Island, NY
Posts: 508
Default

I still use mine, only because I just recently changed the pump and it is new. Try posting this as a question in the forums. A lot of guys here have successfully done that and can guide you through it.
__________________
1987 V20
1996 Jonhson 150 OceanRunner
Reply With Quote
  #6  
Unread 07-15-2012, 04:00 PM
reelapeelin's Avatar
reelapeelin reelapeelin is offline
God
 
Join Date: Aug 2003
Location: Spartanburg, SC
Posts: 15,610
Default

Quote:
Originally Posted by Joker2 View Post
I was leaning towards doing that anyway, is it complicated to do ?
Once you have done what's needed to your motor, use one of these to determine how much oil to add to the amount of gas you just put into the tank...

http://www.westmarine.com/webapp/wcs...x#.UAMteZEw8TA

Many places have these other than West...Walmart has 'em I think...no matter where you get it, it has graduated markings on the side to determine the amount of oil you need to add...A NO BRAINER which is the way I like it...on mine, it indicates one full bottle to 10 gals of gas...for instance 25 gals gas would get 2 1/2 bottles of oil...and so on...it's a perfect measure every time...

My rule on auto-oilers: If it ain't under warranty, disconnect it...but that's just me...lotta people love 'em and use 'em...
__________________
'74 V-20/ BF 150
'95 V-21/ BF 150
'84 V-20/ 200 2.4 Merc
'87 V-20/'18 F150 Yamaha



http://www.wellcraftv20.com/gallery/albums/MJ-hide/Iphone201205.jpg
Reply With Quote
Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -5. The time now is 03:08 AM.


Powered by vBulletin® Version 3.8.2
Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.