|
|
|
|
#1
|
||||
|
||||
oh ok. Mold it is!
__________________
1983 V-20 capsized. . . . in the garage. 
|
|
#2
07-06-2012, 02:56 PM
|
|||
|
|||
|
I don't know crap really but is it mat that has a binder that will only dissolve in the streyne in polyester reisn? I guess if you are not using epoxy then it doesn't matter
|
|
#3
07-06-2012, 06:05 PM
|
||||
|
||||
|
Holy cow! This is alot of mat. I will get pics when i get home. Its two full rolls, one in an unopened box. I think each box is close to 100lbs. Already itching..........
MB not sure on that one. I will need help figuring out what this mat is.
__________________
1983 V-20 capsized. . . . in the garage.
|
|
#4
07-06-2012, 07:07 PM
|
||||
|
||||
|
Ok here are a few pics. Does anybody know what the mat is? Its 54" wide and i have two full rolls of it.
Barely fits with the back seat down  Here is the roving  Front side of mat  Back side of mat 
__________________
1983 V-20 capsized. . . . in the garage.
|
|
#5
07-06-2012, 08:53 PM
|
||||
|
||||
|
Looks to be a 1.5 oz. Chop strand mat (CSM). The other narrow roll seems to be a 18 oz. Woven roving type 10 or 12 inch tape
|
|
#6
07-06-2012, 10:08 PM
|
||||
|
||||
|
Will it work for a bracket, closing the transom, and some floor mods?
__________________
1983 V-20 capsized. . . . in the garage.
|
|
#7
07-10-2012, 10:55 AM
|
|||
|
|||
|
Don't use just the mat for closing your transom and making your bracket. It will take tons of time and resin to get the proper thickness and even then it won't be as strong as if you used 1708 or 1808.
You could use it, but I would also get some wide rolls of roven and alternate layers.
__________________
Brian
|
 |
| Thread Tools | |
| Display Modes | |
|
|
Hybrid Mode
