|
|
|
|
#1
|
||||
|
||||
no start
Ok, I found out why It starts and then turn key and nothing, there is a big round, black plug and on that same board is a red reset button, well that plug keeps coming out as the eng turns over.
Any one tell how that is normaly held in? a clip some wire, elect wraps? also changed the fuel line it was old and brittle. Still no gas at the fuel pump... I have not got it to start yet still working on it... 
|
|
#2
06-10-2012, 08:37 PM
|
||||
|
||||
__________________
1987 V20 w/1987 150HP Yamaha on a Shoreland'r Trailer 1978 16.5 Airslot w/1996 120HP Force on a Four Winns trailer 1996 V21 w/1993 200HP Mercury on a Shoreline Trailer All towed by a 5.7L Hemi Durango. If God didn't have a purpose for us we wouldn't be here, so Live simply, Love generously, Care deeply, Speak kindly. (Leave the rest to God)  Silence, in the face of evil, is itself evil. Not to speak is to speak, not to act is to act. God will not hold us guiltless.
|
|
#4
06-11-2012, 07:06 AM
|
||||
|
||||
|
take note of that electrical plug, it will not be the last time you look at it. Sounds like your fuel pump may be bad, hook an outboard primer bulb to the rubber fuel line and see if you can pull fuel from the tank, that will let you know if you have a blockage from the tank
|
 |
| Thread Tools | |
| Display Modes | |
|
|
Hybrid Mode
