Fuel Tank

[phatdaddy]

here is a link to the guys that made them for the wellcraft
http://www.wellcraftv20.com/communit...ad.php?t=11968

[tartuffe]

Here is also a link to the best prices I have found on plastic and aluminum tanks hands down. I just had a new 72 gallon aluminum tank delivered to NC for $523

http://www.themarineconnection.net/

[Cam]

Here are the dimensions of a 1985. mine is a 1987 V20 and is the same. Not sure if they are similar to an 88'. Hope it helps you.

[awthacker]

Just received my new Moeller 52 gallon tank today. Lost 8 gallons capacity, but it's a poly tank and it was only $450 inc. shipping from iBoats. I do have to replace the vent hose, and extend the fill hose, though.

Any recommendations on how to install it? I'm leaning towards rubber isolation pads beneath and glassed in on top and in back with some 1x4s. I may choosed glassed 1x4s underneath instead of isolation pads. I definitely won't be foaming it in.

[Destroyer]

Originally Posted by awthacker

Just received my new Moeller 52 gallon tank today. Lost 8 gallons capacity, but it's a poly tank and it was only $450 inc. shipping from iBoats. I do have to replace the vent hose, and extend the fill hose, though.

Any recommendations on how to install it? I'm leaning towards rubber isolation pads beneath and glassed in on top and in back with some 1x4s. I may choosed glassed 1x4s underneath instead of isolation pads. I definitely won't be foaming it in.

Wrap it in Shrink Wrap or even Saran Wrap .....then foam it in place. The foam will expand, cling to the plastic wrap and form a cavity in the shape of the tank, but will not actually cling to the tank....so if you ever need to remove it all you'll have to do is cut the plastic wrap and lift it out. Simple really.

[jasoncooperpcola]

Wont expanding foam collapse the tank some and not allow for hydrocarbon swelling?

[Destroyer]

Originally Posted by jasoncooperpcola

Wont expanding foam collapse the tank some and not allow for hydrocarbon swelling?

Good questions. My answers would be
1) I don't think so
and
2) I don't think so.

If you just foam the bottom of the tank and maybe a quarter to a half up the sides that shouldn't collapse the tank at all. And since the top and the sides would be free of foam any expansion should be able to happen without a problem.

Remember the original question was what was the best way to mount the tank. Foaming is ideal, since the expanding foam locks the tank in place. The problem with foam has always been if you need to remove a foamed in place tank it's a real bear. But by wraping the tank in a plastic film, you solve that problem. The foam adhears to the plastic film, not the tank, so removing the tank is as easy as simply cutting the film and lifting the tank out.

Understand this is just my opinion, but really, I cannot see any downside to it. Can anyone else see any problems? I see this as one of those "so simple it's a wonder why no one thought of it before" type of problems.