Wellcraft V20 Community

Go Back   Wellcraft V20 Community > Wellcraft V-20 Forums > Repairs

Reply
 
Thread Tools Display Modes
  #1  
Unread 05-08-2012, 07:36 PM
spareparts's Avatar
spareparts spareparts is offline
God
 
Join Date: Oct 2006
Location: Raleigh, NC
Posts: 6,192
Default

those early 470's have the good carbs on them, if you haven't already. Do a compression test. Check your timing. I highly recommend doing an electronic conversion on the distributor(it will help with the idle issue). try and set the idle mixture screws with the boat in the water, it should idle right around 750-800 rpm. Look down the throat of the carb, if you have fuel dripping off the boosters, you have the idle speed screw set too high. Start with the idle mixture screws at about 1 1/2 turns out from lightly bottomed out
Reply With Quote
Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -5. The time now is 10:18 PM.


Powered by vBulletin® Version 3.8.2
Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.