|
|
|
|
#1
|
|||
|
|||
I haven't ordered the led's yet. I have only gotten as far as research. I am thinking about three or four multi led lights in each. Each one gives about 150 lumens each. It has been a little bit since I have looked into the matter so most of the info is not fresh on my brain.
__________________
84' Wellcraft Fisherman 18 / 96' Evinrude 130-Sold 20' Fisherman project underway www.ParkerFenceandDeck.com 
|
|
#2
06-06-2012, 07:40 PM
|
||||
|
||||
|
Well I have decided to go a different route with my underwater transom lights. Im gonna do the same thing CURAPA is planning on doing, Im gonna completely incapsulate the LED lamp by laying it in a mold and then potting it with a uv resistant epoxy. My LED lamps have changed also, Im gonna beinng using a 2 "high output" LED lamps that contain 30 LEDS per lamp for a total of 60 LEDS per light (I will have 2 light fixtures on my transom) Im ordering the materials tonight. The LEDS will come from Superbrightleds.com (g4 side pin 30 LED lamp) and the uv epoxy is coming from eco epoxy systems. I will have a total of 120.00 dollars for bothe lights. The LED lamps are 16 dollars a piece and the epoxy is 24 dollars for a pint. I might call eastern burlap in norfolk tomorrow to see if they have a comparible epoxy product for cheaper.
Last edited by Kracker Jack; 06-06-2012 at 07:45 PM.
|
|
#3
06-08-2012, 08:41 PM
|
||||
|
||||
Sounds cool, look forward to seeing ya'lls progress Curupa and Kracker.
__________________
1985 Wellcraft V-20, Evinrude ETEC 150: SOLD 1979 Marine Trader 44, twin Ford Lehman 120s 2006 Panga 14, Tohatsu 20
|
 |
| Thread Tools | |
| Display Modes | |
|
|
Hybrid Mode
