pre fab radar arch choices, any thoughts?

[Illogikal99]

Originally Posted by Genie Aye

I have the Atlantic tower in a box-- I will recomend--very well built and very stable--good fit and I think looks great on these boats. I have added 4 pole holders up top and am working on a flip up stern light and radar. Here are a few pictures. If you have more questions of me and this arch--just ask!

Wow! Looks great! thats def my future rig. AT's arch does look perfect. so is there any play or rattle in the arch?

[Genie Aye]

No play and no rattle at all---and apparently the supports they supply are plenty as I do not even have any stress cracks after 2 years--and I tend to run hard out in the Pacific Northwest waters.

Here are some more pictures with the 8 pole holders.

[Illogikal99]

Originally Posted by Genie Aye

No play and no rattle at all---and apparently the supports they supply are plenty as I do not even have any stress cracks after 2 years--and I tend to run hard out in the Pacific Northwest waters.

Here are some more pictures with the 8 pole holders.

good to know! gonna have to save some cash. did you install on your own or have it done?

[Genie Aye]

I did do the install myself-----

But measured 4 times and cut once!!!

On the pieces mounting to the sides of the boat--I taped the pipe and then cut it with a pipe cutter(roller wheel) for a clean straight cut. Then they epoxy on to the ends plus you drill and tap holes for bolts as well--They have engineered these well--I will be mounting my stern light up there and a radar(plate is there) and there are 2 other plates on top of arch for antennas if you want, plus I like the flat plates on the side--I will be building some hangers there for gaffs and possibly some outriggers.

I get alot of compliments on it--most think it is a custom.

I looked at different arches and custom builds and me builds--It was worth every penny!!

[Illogikal99]

Originally Posted by Genie Aye

I did do the install myself-----

But measured 4 times and cut once!!!

On the pieces mounting to the sides of the boat--I taped the pipe and then cut it with a pipe cutter(roller wheel) for a clean straight cut. Then they epoxy on to the ends plus you drill and tap holes for bolts as well--They have engineered these well--I will be mounting my stern light up there and a radar(plate is there) and there are 2 other plates on top of arch for antennas if you want, plus I like the flat plates on the side--I will be building some hangers there for gaffs and possibly some outriggers.

I get alot of compliments on it--most think it is a custom.

I looked at different arches and custom builds and me builds--It was worth every penny!!

sweet! I know who to bother when I have build questions! Boat looks great with the arch, wise choice...

[jasoncooperpcola]

How tall do these arches stand above the gunnels? I have a 14' vhf antenna, and would like to mount it on the gunnel and support it with the arch. I cannot remember where Shakespeare Antennas said my support needed to be. I want the antenna as high as possible. But i do not want to have to stand on the gunnels or climb on something to get rods out.

[Genie Aye]

You will have to pull up the AT website to see- but I cut about 3 inches off the upright hieght on mine and you can see where it is on the stand up top.
The bridge for the arch you order the width you need--they have 3 widths to help with different widths.

You can also mount the feet(supports) at any angle you want.

[billfish16]

Originally Posted by Genie Aye

I have the Atlantic tower in a box-- I will recomend--very well built and very stable--good fit and I think looks great on these boats. I have added 4 pole holders up top and am working on a flip up stern light and radar. Here are a few pictures. If you have more questions of me and this arch--just ask!

Originally Posted by Genie Aye

No play and no rattle at all---and apparently the supports they supply are plenty as I do not even have any stress cracks after 2 years--and I tend to run hard out in the Pacific Northwest waters.

Here are some more pictures with the 8 pole holders.

Very nice!