what to use to cut fiberglass

[Kracker Jack]

The best thing I have found to cut fiberglass is my 4 1/2 inch angle grinder with a cheap 16 to 20 dollar masonary wheel ( Diamond wheel) from lowes or home depot. It cuts its like butter!!! no chipping of edges and will even cut thru core material to a certain extent. go back to the tile floor section were all the tile tools are.

[Skools Out]

Originally Posted by Kracker Jack

The best thing I have found to cut fiberglass is my 4 1/2 inch angle grinder with a cheap 16 to 20 dollar masonary wheel ( Diamond wheel) from lowes or home depot. It cuts its like butter!!! no chipping of edges and will even cut thru core material to a certain extent. go back to the tile floor section were all the tile tools are.

agree best to use that's what i've found to be best and leaves cleanest edges. i always use my 4" angle grinder and my air cut off wheels.

[BigHE]

Originally Posted by Kracker Jack

The best thing I have found to cut fiberglass is my 4 1/2 inch angle grinder with a cheap 16 to 20 dollar masonary wheel ( Diamond wheel) from lowes or home depot. It cuts its like butter!!! no chipping of edges and will even cut thru core material to a certain extent. go back to the tile floor section were all the tile tools are.

Like this one? This is what I found at Lowes.

[Kracker Jack]

Yes sir!! that would be the one. It will last the rest of your build and still do the cut ins on your tile floor!!! lol!!!

[BigHE]

Cool. Thanks.

[MIKETTURBO]

dremel tool with a spiral bit.works great but you need a careful & steady hand.