Wellcraft V20 Community

Go Back   Wellcraft V20 Community > Wellcraft V-20 Forums > Repairs

Reply
 
Thread Tools Display Modes
  #1  
Unread 03-14-2012, 09:18 PM
bgreene bgreene is offline
Banned
 
Join Date: Jul 2005
Location: Cherry Hill, NJ
Posts: 6,461
Default

Quote:
Originally Posted by Destroyer View Post
Foaming complete.. after thinking about it and everything I just decided it was easier to foam, make it all watertight and (like MJ said) go fishing. Made a few improvements though... Foamed it completely up to the bottom of the deck , and, as shown in the last pic (sorry its a little dark) in the transom area we glassed from the splashwell to the transom to add a little extra strength to that area. (There's a gap of about an inch and a half on both sides of the splashwell that we filled with putty and then glassed over). Don't know why Wellcraft didn't do that when they made the boats... just seems like common sense. Oh well.....





Moving right along.... Next I have to add the hatch in the front area as previously discussed, get new rod boxes for the sides and install them and then start mounting things like the bimini, radar arch, antennas, engine, etc.
Good for you - turning another good V boat into a great classic V boat.
Look foward to seeing the finished results.
Reply With Quote
  #2  
Unread 03-15-2012, 01:47 PM
Blue_Runner's Avatar
Blue_Runner Blue_Runner is offline
Administrator
 
Join Date: Aug 2004
Location: Lexington, North Carolina
Posts: 9,234
Default

+2 on the Durabak. Very good stuff. My buddy used white. The light gray would probably not show the dirt as much. It cleans up nice with a stiff brush and good detergent but takes some scrubbing. Very good non-skid product and 2 coats will do. I never go barefoot but it doesn't seem like it would be too bad on the feet?
__________________

1994 Wellcraft V21
Reply With Quote
  #3  
Unread 03-18-2012, 11:43 PM
Destroyer's Avatar
Destroyer Destroyer is offline
God
 
Join Date: Apr 2010
Location: Montville, NJ
Posts: 8,236
Smile

Well, the deck is done and drying/curing. Went with U-Pol urathane bed liner in Artic white. (it's kinda like a slightly off white....not grey) Put in a hatch as was suggested in front of the gas tank...although truthfully, after it was in I'm thinking I should have gone with a bigger hatch...but it's easy enough to cut out a new hole and just screw in a bigger one if I deem it necessary. Time will tell. All underfloor hoses were replaced with new....just seemed prudent. Rod boxes have a few cracks in them that I'll need to glass, so they're just in there for show right now. Next project is lenghtening my 20" Merc 200 into a 25" and mounting it on the rear. Fun, fun, fun ... Oh..and I MUST get new seats and cushions.




__________________
1987 V20 w/1987 150HP Yamaha on a Shoreland'r Trailer
1978 16.5 Airslot w/1996 120HP Force on a Four Winns trailer
1996 V21 w/1993 200HP Mercury on a Shoreline Trailer
All towed by a 5.7L Hemi Durango.


If God didn't have a purpose for us we wouldn't be here, so
Live simply, Love generously, Care deeply, Speak kindly.
(Leave the rest to God)

Silence, in the face of evil, is itself evil. Not to speak is to speak, not to act is to act. God will not hold us guiltless.
Reply With Quote
  #4  
Unread 03-19-2012, 10:15 AM
bradford's Avatar
bradford bradford is offline
God
 
Join Date: Nov 2006
Location: Wilmington Island, Georgia
Posts: 4,879
Thumbs up

Looks Great!!!
__________________
1985 Wellcraft V-20, Evinrude ETEC 150: SOLD
1979 Marine Trader 44, twin Ford Lehman 120s
2006 Panga 14, Tohatsu 20
Reply With Quote
  #5  
Unread 03-19-2012, 10:25 AM
buckleyjr's Avatar
buckleyjr buckleyjr is offline
Senior Member
 
Join Date: Mar 2005
Location: Morganville, NJ
Posts: 223
Default

Looks GREAT! I really like the hatch. There is also a hollow space under the captains chair, forward of the live bait well.
__________________
1995 V21 w/175 Evinrude E-Tec
Morganville, New Jersey
Reply With Quote
  #6  
Unread 03-20-2012, 06:47 AM
RidgeRunner's Avatar
RidgeRunner RidgeRunner is offline
God
 
Join Date: Aug 2009
Location: Lakeland, Fl
Posts: 2,526
Default

Nice work Destroyer. Looks brand new.
__________________

1996 -19' NV Flats 115 Mercury 4-stroke
1983 -20' Wellcraft Center Console 250 XS
Reply With Quote
  #7  
Unread 03-20-2012, 01:26 PM
phatdaddy's Avatar
phatdaddy phatdaddy is offline
God
 
Join Date: Mar 2003
Location: south of I-10
Posts: 4,965
Default

looks great, i have the larger size hatch, and in that high trafic area, the tend to last only 2 or 3 years before cracking. by going with the smaller one, you will probably get a longer life span out of yours.

how aggresive is the texture of your deck, would bare feet be uncomfortable?
Reply With Quote
Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -5. The time now is 05:47 AM.


Powered by vBulletin® Version 3.8.2
Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.