|
|
#1
|
||||
|
||||
Volvo Penta hyd cyl rebuild
My I/O hyd cylinders for my 290 Volvo Penta duo prop outdrive were leaking.
Volvo doesn't make a rebuild kit. These cylinders are $800 used and $2000 new. I got lucky I found a hydraulic repair shop about 45 minutes away in Portsmouth Va. Hydraulic Service is the company @ 1-757-487-2513 that rebuilt mine. Cost me $300 for both. I'm sure they had to charge me for the time they spent looking up O rings and wipers by size; someone else would just have to pay for time to rebuild theirs. Hope someone else can use the info. Here's the sizes to rebuild 1 cylinder: MOR 35.5X2 MUU 16X24X4.5 MSWH 16X24X4.5 MKPD 35X27X3.2
__________________
Tis better to be quiet and thought a fool than open your mouth and prove it!! 1991 V-20 cuddy I/O 350 volvo duo prop, 1998 15ft Grumman 9.9 Johnson  
|
|
#2
02-13-2012, 08:46 PM
|
||||
|
||||
|
what happened to my rebuild job,didn't last?
|
|
#3
02-13-2012, 10:09 PM
|
||||
|
||||
|
With me just being able to get the one seal and without the other 3 being up to par, I guess I should have figured 1 seal wasn't going to hold all that pressure.
If I had been able to get you all the seals I'm sure you could have fixed the cylinders as good or (knowing you) better than they did. I still need to get with you on the elctronic ignition.
__________________
Tis better to be quiet and thought a fool than open your mouth and prove it!! 1991 V-20 cuddy I/O 350 volvo duo prop, 1998 15ft Grumman 9.9 Johnson
|
|
#4
02-14-2012, 06:34 AM
|
||||
|
||||
|
just giving you a hard time, let me know when yo want to get the ignition
|
|
#5
02-14-2012, 02:11 PM
|
||||
|
||||
|
I figured you were. I'd still rather have had you rebuild them.
__________________
Tis better to be quiet and thought a fool than open your mouth and prove it!! 1991 V-20 cuddy I/O 350 volvo duo prop, 1998 15ft Grumman 9.9 Johnson
|
 |
| Thread Tools | |
| Display Modes | |
|
|
Linear Mode
