|
|
|
|
#1
|
|||
|
|||
My brother inlaws merc 125 had a bracket that flipped up to take the load off when trailering but I love that idea simple easy and not expensive like most things associated with a boat
Bring Out Another Thousand seems to be all too true
__________________
One of these days i will manage to get everything working as it should.......yeah right 76 v20 cuddy w/ 78 johnson 175 and 15hp nissan pulled by a POS ford bronco or a 84 diesel suburban 
|
|
#2
01-26-2012, 08:24 PM
|
||||
|
||||
|
excellent idea, i love creative uses of pvc i modified this transom saver to fit into the drain hole to take the weight off the rams and transfer some it to the lower transom, but your idea is a lot simpler.
 
|
|
#3
01-27-2012, 06:14 AM
|
||||
|
||||
|
Phat, I've got one of the support brackets like yours and made a run at using just as you did having it fit into the drain hole...problem is when I got this boat the drain sleeve wasn't right and I hollowed it out and installed one of the screw-in garboard style plugs...concerned about messing up the threads inside...I know it can be made to work, but I came up w/the support tubes above before I figured out how to do it...BTW, you mentioned PVC uses...those tubes are cut from a Minn Kota trolling motor shaft and are reinforced fiberglass...it might, but I don't think PVC would last long...
What I REELY DO LIKE in your pics are the sprinkler-heads under your boat!!...I assume you FLOOD the bottom and trailer w/one turn of a spigot...GREAT IDEA!!... 
__________________
'74 V-20/ BF 150 '95 V-21/ BF 150 '84 V-20/ 200 2.4 Merc '87 V-20/'18 F150 Yamaha 
Last edited by reelapeelin; 01-27-2012 at 06:20 AM.
|
 |
| Thread Tools | |
| Display Modes | |
|
|
Hybrid Mode
