More trailer advice

[Kracker Jack]

Our Alby rides on the trailer with very very narrow rollers and shes "ONLY" 7200 lbs. dry weight LOL!!!! it rides fine. I dont think you would have an issue.

[bgreene]

My V21 is on a roller trailer - and it looks like the rollers on mine are inside of where your's are........ so I believe you'll be much better off moving em' in some !

[randlemanboater]

My Dad had one of those Cox roller trailers when I was a kid...it was a real pain in the BEE-HIND!

Luckily between the two of us we could just shove up and over on the boat to jump the rib over the roller.

I vowed then to never own a roller trailer.

[smokeonthewater]

yep adjust em in.... also consider adding a cross member near the front with a self centering keel roller... I did that on an EZ loader I was using to haul a 26' carver flybridge and it completely solved the very same problem... I assume that your "wz loader" would work the same.

:D

[Genie Aye]

Here was my remedy for the exact same issue---with my Cox--I did the same thing--I adjusted the rollers everywhere--this is how I handled it--and it works--I power the boat on after sinking the trailer a bit over half way and it centers every time. First I mounted the boards and covered off of rough measurements and then loaded the boat and then had to jack up the boat and move the boards a hair to get everything where they needed to b and the boards bow just right to support the boat fully, and walah--perfect and would never go back.

[reelapeelin]

I like Genie's conversion...it may truly not be for everybody...but if I woke up w/a roller trailer in the driveway tomorrow, I'd have to give that whirl...

[tsubaki]

Man, what happened to the simple design of keel rollers and bunks. It's been my staple for most boats.

[aussie]

Originally Posted by Genie Aye

Here was my remedy for the exact same issue---with my Cox--I did the same thing--I adjusted the rollers everywhere--this is how I handled it--and it works--I power the boat on after sinking the trailer a bit over half way and it centers every time. First I mounted the boards and covered off of rough measurements and then loaded the boat and then had to jack up the boat and move the boards a hair to get everything where they needed to b and the boards bow just right to support the boat fully, and walah--perfect and would never go back.

i really like this set up looks nice and simple but i think i would like some keel rollers or is it fine that way