Va Beach v20 project

[Curapa]

I have had my fair share of leaning over the transom and pulling the plug from the outside to drain water. It's not easy when on plane!

[Orlando]

i have an 1100gph bilge pump,backed up by a 750 gph pump. i put plugs in both sides of the drain, because my boat doesnt have a threaded plug and i want to be damn sure they stay put

[Orlando]

If you need an extra set of hands on setting the motor or anything like that kracker let me know, i live off of rosemont and can lend a quick hand if needed from time to time.

[Kracker Jack]

Originally Posted by Orlando

If you need an extra set of hands on setting the motor or anything like that kracker let me know, i live off of rosemont and can lend a quick hand if needed from time to time.

I appreciate the offer. My dad has a forklift so hanging the motor is going to be cinch. Thank you. My mom and dads place is off Sandbridge Rd (thats where the boat is for now), by MARGIE AND RAYS seafood restraunt. come check out the build when ever you want I will be there all day tomorrow.

[Kracker Jack]

Here are some pictures from today. The chase tube fabrication went very smooth. I didnt exactly like drilling a hole through a newly replaced stringer but i'll get over it. The hole drilled through the sringer was drilled slightly larger to allow thickened resin to bed the tube and seal the raw wood. I also took some more pictures with the console in to show my setup.

[Kracker Jack]

So here is my new choice of power for my v20!!! what do you guys think? Should I keep the 2 hp on my v20 or put it back on my flat back canoe? LOL!!!

[mike77v20]

thanks on the scupper info is that an open invite on stopping by and checking out the boat

[Kracker Jack]

Originally Posted by mike77v20

thanks on the scupper info is that an open invite on stopping by and checking out the boat

Mike come by tomorrow. I will pm you my cell number.