|
|
|
|
#1
|
||||
|
||||
ball scuppers
My plan was to not install the scuppers till i splash it and find out floor height ( BUT IT WAS IN THE DRAIN PLANS) LOL!!. My dad had scuppers on his, but his was a 84'
|
|
#2
01-16-2012, 06:40 PM
|
||||
|
||||
|
Quote:
That's why I brought it up as a concern...your dad's '84 was AFTER Wellcraft raised the floor and heightened the cap to make self-draining and put the fuel tank under the floor...good luck w/it and w/your skills, I'm confident if you install scuppers in wrong place, you can always reposition them... 
__________________
'74 V-20/ BF 150 '95 V-21/ BF 150 '84 V-20/ 200 2.4 Merc '87 V-20/'18 F150 Yamaha 
|
|
#3
01-16-2012, 08:14 PM
|
||||
|
||||
|
Well today due to the holiday I was able to rough in my sole and also cut the hole for my splash "sump well". I recessed the rough opening on the sump liner hole so I can glue in my fabricated splash well and glass over the lip flush with the my glass for my sole.
|
|
#5
01-17-2012, 12:00 PM
|
|||
|
|||
|
Looking good brother!
__________________
84' Wellcraft Fisherman 18 / 96' Evinrude 130-Sold 20' Fisherman project underway www.ParkerFenceandDeck.com
|
|
#7
01-18-2012, 08:28 PM
|
||||
|
||||
|
Mike a scupper works as a one way type valve allowing water out of the boat through a transom hole but a flapper on the outside does not allow water to come back inside the boat. search scupper on google
|
 |
| Thread Tools | |
| Display Modes | |
|
|
Hybrid Mode
