|
|
|
|
#1
|
||||
|
||||
Spare-
Don't want to derail, but had couple Q's on the duraback (we can start a new thread if you want). Anyway, how's it holding up? I know you wanted to just do the inside once and not have to worry about it but never heard how tough the stuff really was. Would you do it again? And how many gallons did it take you? I am working on my 14 this winter and just saw your pics. Looks like the perfect solution, but have no idea the cost. Thanks. -Svence
__________________
1984 V-20 Steplift 1998 Johnson 175 
|
|
#2
10-30-2011, 07:33 AM
|
||||
|
||||
|
The durabak did exactly what I wanted it to do, I ended up using more than I thought I was, mainly due to the company sending a miss mixed batch and told me to tint it with black(ended up gray). It is a pain to clean. Usually I stop at the car wash and hose it out, or take a pressure washer to it. I usually spray some cleaner/bleach on it and let it soak in, then hose it out. It looks ready to go afterwards. My boat had a lot of screw holes that were filled in, I didn't want to spend a lot of time blocking out the inside of this boat, so i went with the durabak. It is aggressive, I've walked on it bare foot, but I prefer wearing shoes. You're not going to slip on it. To do a 14 Mckee, I'd say you're going to need two gallons, mine took at least that amount, but I had two bench seats, and a casting deck that got painted as well.
|
|
#3
11-18-2011, 02:58 AM
|
||||
|
||||
|
Bump this one up for a sweet boat.
They say that after a worldwide nuclear war the only things left will be cockroaches, radiation, and old McKee Craft hulls.
__________________
1985 Wellcraft V-20, Evinrude ETEC 150: SOLD 1979 Marine Trader 44, twin Ford Lehman 120s 2006 Panga 14, Tohatsu 20
|
|
#4
11-19-2011, 10:10 PM
|
||||
|
||||
|
thanks for the bump Bradford, got a guy coming tomorrow that says he's gonna take it, he can have it when the cash hits my hand
|
|
#5
11-20-2011, 09:45 AM
|
||||
|
||||
|
Quote:
Good luck...hope it works(ed) out... 
__________________
'74 V-20/ BF 150 '95 V-21/ BF 150 '84 V-20/ 200 2.4 Merc '87 V-20/'18 F150 Yamaha 
|
|
#6
11-20-2011, 01:20 PM
|
||||
|
||||
Quote:
__________________
1985 Wellcraft V-20, Evinrude ETEC 150: SOLD 1979 Marine Trader 44, twin Ford Lehman 120s 2006 Panga 14, Tohatsu 20
|
|
#7
11-20-2011, 06:24 PM
|
||||
|
||||
|
guy never called or showed up
|
|
#8
11-20-2011, 06:45 PM
|
|||
|
|||
|
Quote:
__________________
*************************************** Stay Safe!  Sold - 1984 V-20 Cuddy with a 2003 Johnson 140 hp gas sippin 4-stroke. 1995 Ranger 250C with a 2015 Suzuki 300 hp 4-stroke.
|
 |
| Thread Tools | |
| Display Modes | |
|
|
Hybrid Mode
