|
|
|
|
#1
|
||||
|
||||
I don't know of a second place to look, to solve the prob I did what Draglink did. Trophy shop did the work. It is the black strip above the transom eye.
__________________
 1996 -19' NV Flats 115 Mercury 4-stroke 1983 -20' Wellcraft Center Console 250 XS 
|
|
#2
07-15-2011, 12:26 PM
|
||||
|
||||
|
Some boats also had them on the inside, on the port side about 3/4 the way from the stern real close to the rub rail.
I'd Dremel the HID back in the location it came from and repaint a little heavy. Don't give them a chance to start thinking your boat has been salvaged, rebuilt or the like, that opens a huge can of worms.
__________________
 '75 Cuddy with '00 Johnson Ocean Pro 150 horse Benny
|
|
#3
07-18-2011, 09:11 AM
|
|||
|
|||
|
Thanks for the responses, I tried an electric engraver over the weekend on a piece of the old transom and it barely scratched it. May have to go the do it on a plate like Ridgerunner and draglink.
I have an older dremel and will try that on the old transom, what type of bit would you use to write with?
|
 |
| Thread Tools | |
| Display Modes | |
|
|
Hybrid Mode
