For GarageNC/ Volvo parts

[bradford]

Saw this on craigslist:

escrow, or any promise of transaction protection/certification/guarantee. More info VOLVO PENTA DUO PROP OUTDRIVES AND TRIM CYLINDER / RAMS RE-SEAL KITS

Date: 2011-05-24, 12:53AM EDT
Reply to: [email protected] [Errors when replying to ads?]
Volvo Penta outdrives Aq series parts for sale:

• Volvo Penta 280 - DP-E Duo Prop lower gear units (Ratio 1:95): These have been pulled apart and inspected, resealed and shafts dial tested.

• Volvo Penta AQ series TRIM CYLINDER seal kits: Save the $500 per cylinder (+ labor) Volvo wants to replace a perfectly good cylinder that is leaking. Do not even have to remove cylinder from transom shield: $85 (2 cylinder kit)

Volvo Penta SX / DPS Trim Cylinder rebuild kit $79 (Single cylinder)

• Volvo Penta C4 Stainless Steel Duoprop inner prop (large prop)

• Many new or refurbished Volvo propellers. I can let these go at a BARGAIN price. Short hub and long hub props

• Refurbished Upper gear units. 290 290A DP-C DP-C1 SP-C SC-C1 DP-E SP-E etc

• Refinished intermediates: Paint flaws sanded, intermediate primed with zinc chromate and then finish primed with epoxy primer

• Helmuts

• Brand New U-joints / Spiders / Crosses : Part numbers 3860232 , 854619 , 3860232 , 8350812 , 853255 : I can get you these at half off of Volvo's price

MUCH MUCH More available. Just contact me, no need to purchase anything, and I will send you Volvo Shop manuals in Adobe format.

• it's NOT ok to contact this poster with services or other commercial interests

PostingID: 2399224242

[garagenc]

Thanks Bradford

All of the AQ series can be rebuilt still attached to the transom shield, except the 290 & 290dp series they have to be removed from the shield. The attached end the shield is what has to be pulled thru the 2 end caps. I had to send mine to a shop, it took 10 tons of pressure to press them out. Now that they have come out I can and will pressure my out with the grease fitting to keep them free. I would like to get another good set of cylinders. I'll contact him to see if he has set or the rebuild kits.

Thanks for keeping a eye out for me.

[spareparts]

so hows that coming, Lee?

[garagenc]

I did find a notice from Volvo that recommended not using ATF in the cyl's, they flushed mine and replaced with oil. The notice said that some of the O rings and seals are made to react (swell) with motor oil and have a tendency not to swell with ATF. So far (cross fingers) it has not leaked.
We'll see. I'm putting it in the water Friday or Sat and trying it.