|
|
|
|
#2
04-26-2011, 05:03 PM
|
||||
|
||||
My inbd was leaking and it turned out to be the rubber seal from the bell housing to the outdrive was tore on the bottom and water was running down the drive shaft and bearing and leaking into the bilge. Also check to see (if yours has one) if your external water pump on the front of the motor is leaking.
__________________
Tis better to be quiet and thought a fool than open your mouth and prove it!! 1991 V-20 cuddy I/O 350 volvo duo prop, 1998 15ft Grumman 9.9 Johnson  
|
|
#4
04-26-2011, 10:49 PM
|
||||
|
||||
|
Double check your shifter bellows. Even if you replace it it can easily tear if you don't get it clamped correctly.
__________________
2011 SUNDANCE B20CCR SKIFF, 2011 YAMAHA 90HP 4 STROKE, 2011 KARAVAN SINGLE AXLE ALUMINUM TRAILER, LOWRANCE ELITE-7 HDI, MINN KOTA RIPTIDE TROLLING MOTOR 2000CC HYDRA-SPORT 225+HP EVINRUDE SOLD  AND THE PINK JEEP!!!! R.I.P. http://www.wellcraftv20.com/communit...ad.php?t=11664 
|
 |
| Thread Tools | |
| Display Modes | |
|
|
Hybrid Mode
