|
|
|
|
#1
|
||||
|
||||
Quote:
__________________
'74 V-20/ BF 150 '95 V-21/ BF 150 '84 V-20/ 200 2.4 Merc '87 V-20/'18 F150 Yamaha 
|
|
#2
04-25-2011, 12:16 PM
|
||||
|
||||
|
Here is the carnage.Trim Pump 001.jpg
Trim Pump 003.jpg Trim Pump 004.jpg Trim Pump 006.jpg Trim Pump 005.jpg
|
|
#3
04-25-2011, 03:42 PM
|
||||
|
||||
|
go ahead and clean hte heads off the other ones with a chisel, that will get the motor out of the way so you can get at whats left. IF you apply heat, it may melt hte screen inside the pump.
|
|
#4
04-25-2011, 04:10 PM
|
||||
|
||||
|
Yep, the last picture shows that there are still some threads to grab onto on the one that broke off. If I chisel the head off the other one at least I can get some blaster in there and have something remaining to grab with vice grips on and peck on. If I use any heat, I will be mindful of the screen. The next two bolts to remove the pump section are probably corroded up as well.. At this point I was planning on rebuilding the entire unit, blast and paint the brackets and hand sand and paint the power trim unit. I will let you know how it goes with bolt extraction. For the time being I got issues at work, maybe tomorrow.
|
|
#5
04-26-2011, 12:10 AM
|
||||
|
||||
|
That completely sucks Ridge...sorry to see the problems you're having.
 To avoid this in the future, don't forget to coat the threads with never-seize when you put it back together. 
__________________
1987 V20 w/1987 150HP Yamaha on a Shoreland'r Trailer 1978 16.5 Airslot w/1996 120HP Force on a Four Winns trailer 1996 V21 w/1993 200HP Mercury on a Shoreline Trailer All towed by a 5.7L Hemi Durango. If God didn't have a purpose for us we wouldn't be here, so Live simply, Love generously, Care deeply, Speak kindly. (Leave the rest to God)  Silence, in the face of evil, is itself evil. Not to speak is to speak, not to act is to act. God will not hold us guiltless.
|
|
#6
04-27-2011, 07:22 AM
|
||||
|
||||
|
I got one out of two of the motor bolts out. Both of the pump section bolts out. More Blaster and more waiting. Corrosion on the threads has the pump stuck to the sides of the broken bolt. Once it releases its grip, the last bolt will be exposed and should virtually fall out. (according to the fine print).
|
|
#7
05-02-2011, 12:56 PM
|
||||
|
||||
|
Got it, the bolts came out as predicted. Then I priced the parts. Trim Pump Motor was $330 from Mercury. Sierra had one for $300. Not a lot of shopping the internet but I found one for $200 from ProMarine. Basic Seal kit is $70. Or I can buy the entire assembly new from Mercury for $677.00.(By Assembly I mean Brand New Motor, Pump and Hydraulic three ram trim system Complete)
|
 |
| Thread Tools | |
| Display Modes | |
|
|
Hybrid Mode
