Hey Spare Skools Ferm

[THEFERMANATOR]

Theres no O-ring in there that I could find in teh diagrams. The kit number is 0437228 but ti appears to be obsolete from BRP, but the SIERRA number is 18-0993 and can be found for around $10-12 online.

[willy]

Is this it Ferm, part of this schematic?
For number 34 it says Oring / valve

http://www.boats.net/parts/search/BR...LD/parts.html#

[THEFERMANATOR]

Originally Posted by willy

Is this it Ferm, part of this schematic?
For number 34 it says Oring / valve

http://www.boats.net/parts/search/BR...LD/parts.html#

That O-ring is for the actual valve that you turn. Is yours leaking at the scrader valve?

[Skools Out]

here ya go willy $8.63

http://www.marineengine.com/newparts...&Engine=&Model=

[willy]

I actually think I need this, I think it might be leaking out of the O Ring thru the little stem on top.
Any tricks to putting them in, lube on ring of some kind etc. part # 18-7044
http://www.marineengine.com/parts/si...ierra00176.htm

[awthacker]

If you're talking about the red valve when you say stem, it will pull straight out if you grip it firmly and tug. Let me know if you need that o-ring, I have a few extra and can get you one for 44 cents.

[Blue_Runner]

I don't know awthacker, $.44 sounds a little steep. Beware Willy, I think he is trying to swindle the ol WOR!

Seriously, good thread. I've seen that red valve before and wondered myself what it was for. Good luck on a cheap fix bud. Don't get too many of those "cheap" fixes.