![]() |
|
|
|
#1
|
||||
|
||||
|
A simple quick check is to check the cooling system once the engine has sat overnight to cool off. If it is holding ANY pressure you have a head gasket leaking. Also check the overflow and the radiator under teh cap for any signs of oil or burned appearance.
__________________
2011 SUNDANCE B20CCR SKIFF, 2011 YAMAHA 90HP 4 STROKE, 2011 KARAVAN SINGLE AXLE ALUMINUM TRAILER, LOWRANCE ELITE-7 HDI, MINN KOTA RIPTIDE TROLLING MOTOR 2000CC HYDRA-SPORT 225+HP EVINRUDE SOLD ![]() AND THE PINK JEEP!!!! R.I.P. http://www.wellcraftv20.com/communit...ad.php?t=11664 |
|
#2
|
|||
|
|||
|
I Wonder
you said that your speed with the 3.7 was very slow and now your truck cant pull a hill with the v in tow ..Just a though ,,i wonder if your foam under the floor is totally saturated and water loged this would add hunderds of unwanted pounds to the boat whick may cause both problems
|
|
#3
|
||||
|
||||
|
Quote:
|
|
#4
|
||||
|
||||
|
Easy way would be to lift the floor panel by your fuel tank, and then take a 1" piece of copper pipe, sharpen one end on a grinder, and take a core sample of the foam in that area. If the foam is dry you should be ok.. if it's saturated with water that's not so good.
__________________
1987 V20 w/1987 150HP Yamaha on a Shoreland'r Trailer 1978 16.5 Airslot w/1996 120HP Force on a Four Winns trailer 1996 V21 w/1993 200HP Mercury on a Shoreline Trailer All towed by a 5.7L Hemi Durango. If God didn't have a purpose for us we wouldn't be here, so Live simply, Love generously, Care deeply, Speak kindly. (Leave the rest to God) ![]() Silence, in the face of evil, is itself evil. Not to speak is to speak, not to act is to act. God will not hold us guiltless. |
|
#5
|
||||
|
||||
|
ok ill try it then if its wet then what can all the foam be removed rrrrrrrrrrrrrr i give up
|
|
#6
|
|||
|
|||
|
I think you can also get to some of the foam from taking out the rod holders..I know the foam is for safety but i HATE the stuff ..Had a few boats over the years and they all had saturated foam from one degree to another..Its like wet snow and when its gets wet it weights a TON.. the bad part is there is no way to get it out ,,,you have to dig it out.. I did here that there was a liquid that you can pour on it and it will desove it but i have looked and looked all over the net and in stores and cant find the stuff ..I have poured everthink from gas to acid on it and no luck..
|
|
#7
|
||||
|
||||
|
this boat is getting better and better each time
|
![]() |
| Thread Tools | |
| Display Modes | |
|
|